- Home/
- Specifications/
- Grader/
- Komatsu/
- GD675-3
Construction Machinery. Grader Komatsu GD675-3
Steerage
Left and right hinge connection | 23 degrees |
Turn radius | 6.9 m |
Sizes
Height to cab upper part | 3120 mm |
Dimensional length | 9865 mm |
Between tyres width | 2550 mm |
Wheelbase | 6070 mm |
Blade base | 2600 mm |
Dual axis wheelbase | 1535 mm |
Operation
Front axle standard operating weight | 4300 kg |
Rear axle standard operating weight | 11510 kg |
Overall standard operating weight | 15810 kg |
Fuel Capacity | 340 l. |
Cooling system fluid volume | 39.5 l. |
Hydraulic system fluid volume | 45 l. |
Transmission fluid volume | 45 l. |
Circular gearbox fluid volume | 5 l. |
Each tandem case fluid volume | 83 l. |
Tyre size | Low-pressure, without inner tube, 17.5R25 |
Operating voltage | 24 V |
Generator current strength | 90 amperes |
Motor
Cylinders number | 6 |
Maximum power | 149 kW |
Effective drives torque 1-2 | 830 Nm |
Effective drives torque 3-4 | 975 Nm |
Effective drives torque 5-6 | 975 Nm |
Effective drives torque 7-8 | 975 Nm |
Displacement | 8.3 l. |
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow |
Manufacturer | Komatsu |
Model | SAA6D114E-3 |
Effective speeds output 1-2 | 134 kW |
Effective speeds output 3-4 | 149 kW |
Power measured at | 1900 rev / min |
Effective speeds output 5-6 | 149 kW |
Torque measured at | 1400 rev / min |
Effective speeds output 7-8 | 149 kW |
Hydraulic system
Overflow valve pressure | 20600 kPa |
Type of pump | Hydraulic system of Closed Center Load Sensing System (CLSS) |
Pump flow rate | 194 l/min |
Gear box
Transmission type | powershift transmission |
Forward gears number | 8 |
Reverse gears number | 4 |
Maximum forward speed | 42.2 km/h |
Maximum reverse gear | 38.3 km/h |
Front Axle
Wheel tilt | 20 degrees |
General fluctuations | 32 degrees |
Clearance | 630 mm |
Dump
Mouldboard width | 3710 mm |
Mouldboard height | 660 mm |
Mouldboard thickness | 25 mm |
Maximum cutting depth | 815 mm |
Left lateral displacement | 820 mm |
Lateral right shift | 820 mm |
Circle
Diameter | 1530 mm |
Rotating | 360 degrees |
Left shift | 625 mm |
Right shift | 625 mm |
Maximum radius outside left tyres | 2000 mm |
Right maximum radius outside tyres | 2000 mm |
Maximum lifting above ground level | 505 mm |
Blade tilt front angle | 40 degrees |
Blade tilt rear angle | 5 degrees |
Images
Sizes
1. Dimensional length | 9865 mm |
2. Between tyres width | 2550 mm |
3. Height to cab upper part | 3120 mm |
4. Wheelbase | 6070 mm |
7. Dual axis wheelbase | 1535 mm |
8. Blade base | 2600 mm |