- Home/
- Specifications/
- Grader/
- New Holland/
- F140
Construction Machinery. Grader New Holland F140
Steerage
| Left and right hinge connection | 25 degrees |
| Turn radius | 7.3 m |
Sizes
| Height to cab upper part | 3340 mm |
| Dimensional length | 8521 mm |
| Between tyres width | 2510 mm |
| Wheelbase | 6219 mm |
| Blade base | 2562 mm |
| Dual axis wheelbase | 1594 mm |
| Rear ground clearance | 610 mm |
Operation
| Front axle maximum operating weight | 3707 kg |
| Rear axle maximum operating weight | 9828 kg |
| Oil system fluid volume | 14.2 l. |
| Total maximum operating weight | 13535 kg |
| Fuel Capacity | 340 l. |
| Cooling system fluid volume | 40 l. |
| Hydraulic system fluid volume | 94.6 l. |
| Transmission fluid volume | 25 l. |
| Circular gearbox fluid volume | 2.8 l. |
| Each tandem case fluid volume | 30 l. |
| Tyre size | 13.00 x 24 (12PR) |
| Operating voltage | 24 V |
| Generator current strength | 70 amperes |
Motor
| Manufacturer | Cummins |
| Model | 6BTA5.9 1 level |
| Power measured at | 2200 rev / min |
| Effective drives torque 7-8 | 141 Nm |
| Displacement | 5.9 l. |
| Aspiration | turbocharging |
Hydraulic system
| Type of pump | full hydraulic system with load sensing |
| Pump flow rate | 192 l/min |
| Overflow valve pressure | 17900 kPa |
Gear box
| Transmission type | Powershift transmission with direct drive |
| Forward gears number | 8 |
| Reverse gears number | 4 |
| Maximum forward speed | 43 km/h |
| Maximum reverse gear | 28.5 km/h |
Front Axle
| Wheel tilt | 18 degrees |
| General fluctuations | 19 degrees |
| Clearance | 622 mm |
Dump
| Mouldboard width | 3658 mm |
| Mouldboard height | 622 mm |
| Mouldboard thickness | 22 mm |
| Maximum cutting depth | 712 mm |
| Left lateral displacement | 533 mm |
| Lateral right shift | 686 mm |
| Lowered blade pressure | 8636 kg |
Circle
| Diameter | 1753 mm |
| Rotating | 360 degrees |
| Maximum radius outside left tyres | 1582 mm |
| Right maximum radius outside tyres | 1742 mm |
| Maximum lifting above ground level | 444 mm |
| Blade tilt front angle | 40 degrees |
| Blade tilt rear angle | 5 degrees |
Images
Sizes
| 1. Dimensional length | 8521 mm |
| 2. Between tyres width | 2510 mm |
| 3. Height to cab upper part | 3340 mm |
| 4. Wheelbase | 6219 mm |
| 5. Rear ground clearance | 610 mm |
| 7. Dual axis wheelbase | 1594 mm |
| 8. Blade base | 2562 mm |