- Home/
- Specifications/
- Grader/
- New Holland/
- G200
Construction Machinery. Grader New Holland G200
Steerage
| Left and right hinge connection | 25 degrees |
| Turn radius | 7289 m |
Sizes
| Height to cab upper part | 3140 mm |
| Dimensional length | 8555 mm |
| Between tyres width | 2650 mm |
| Wheelbase | 6219 mm |
| Blade base | 2562 mm |
| Dual axis wheelbase | 1602 mm |
| Rear ground clearance | 378 mm |
| Front part clearance | 622 mm |
Operation
| Overall standard operating weight | 17117.7 kg |
| Fuel Capacity | 340.7 l. |
| Cooling system fluid volume | 39.7 l. |
| Hydraulic system fluid volume | 179.8 l. |
| Transmission fluid volume | 22 l. |
| Rear differential/final drive fluid volume | 12.1 l. |
| Circular gearbox fluid volume | 2.8 l. |
| Each tandem case fluid volume | 22.7 l. |
| Tyre size | 14.00x24 10 layers G2 |
| Operating voltage | 24 V |
| Generator current strength | 80 amperes |
| Front axle standard operating weight | 5102.9 kg |
| Rear axle standard operating weight | 12014.8 kg |
Motor
| Manufacturer | Cummins |
| Model | QSB 6.7L |
| Power measured at | 2200 rev / min |
| Torque measured at | 1600 rev / min |
| Cylinders number | 6 |
| Effective speeds output 7-8 | 152.9 kW |
| Maximum power | 152.9 kW |
| Effective drives torque 7-8 | 881.3 Nm |
| Displacement | 6.7 l. |
| Aspiration | turbocharging |
Hydraulic system
| Type of pump | variable displacement piston pump |
| Pump flow rate | 185.5 l/min |
| Overflow valve pressure | 17926.4 kPa |
Gear box
| Transmission type | Powershift transmission with direct drive |
| Forward gears number | 8 |
| Reverse gears number | 4 |
| Maximum forward speed | 43 km/h |
| Maximum reverse gear | 30.6 km/h |
Front Axle
| Wheel tilt | 17.5 degrees |
| General fluctuations | 19 degrees |
| Clearance | 622 mm |
Dump
| Mouldboard width | 4267.2 mm |
| Mouldboard height | 622 mm |
| Mouldboard thickness | 22 mm |
| Left lateral displacement | 533 mm |
| Lateral right shift | 711 mm |
| Lowered blade pressure | 8795.6 kg |
Circle
| Diameter | 1753 mm |
| Rotating | 360 degrees |
| Maximum radius outside left tyres | 1978 mm |
| Right maximum radius outside tyres | 2174 mm |
| Maximum lifting above ground level | 445 mm |
| Blade tilt front angle | 42 degrees |
| Blade tilt rear angle | 5 degrees |
Images
Sizes
| 1. Dimensional length | 8555 mm |
| 2. Between tyres width | 2650 mm |
| 3. Height to cab upper part | 3140 mm |
| 4. Wheelbase | 6219 mm |
| 5. Rear ground clearance | 378 mm |
| 6. Front part clearance | 622 mm |
| 7. Dual axis wheelbase | 1602 mm |
| 8. Blade base | 2562 mm |