Construction Machinery. Grader Volvo G730 VHP

Steerage

Left and right hinge connection 22 degrees

Sizes

Height to cab upper part 3099 mm
Dimensional length 8484 mm
Between tyres width 2540 mm
Wheelbase 6096 mm
Blade base 2591 mm

Operation

Rear differential/final drive fluid volume 23 l.
Each tandem case fluid volume 100 l.
Tyre size 14.00 x 24, G-2
Operating voltage 24 V
Generator current strength 75 amperes
Front axle standard operating weight 4806 kg
Rear axle standard operating weight 10957 kg
Overall standard operating weight 15763 kg
Fuel Capacity 378.5 l.
Cooling system fluid volume 47 l.
Hydraulic system fluid volume 90 l.
Transmission fluid volume 38 l.

Motor

Manufacturer Cummins
Model 6C8.3
Effective speeds output 7-8 160.3 kW
Maximum power 160.3 kW
Effective drives torque 7-8 964 Nm
Displacement 8.3 l.
Aspiration turbocharging

Hydraulic system

Type of pump hydraulic system with load sensing
Pump flow rate 191 l/min
Overflow valve pressure 17236.9 kPa

Gear box

Transmission type powershift transmission
Forward gears number 8
Reverse gears number 4
Maximum forward speed 45.9 km/h
Maximum reverse gear 32.8 km/h

Front Axle

Wheel tilt 18 degrees
General fluctuations 16 degrees
Clearance 610 mm

Dump

Mouldboard width 3657.6 mm
Mouldboard height 635 mm
Mouldboard thickness 22.2 mm
Maximum cutting depth 812.8 mm
Left lateral displacement 673.1 mm
Lateral right shift 673.1 mm
Blade pulling at maximum weight 9859.3 kg
Lowered blade pressure 8357.9 kg

Circle

Diameter 1683 mm
Right shift 749.3 mm
Rotating 360 degrees
Maximum radius outside left tyres 2019.3 mm
Left shift 774.7 mm
Right maximum radius outside tyres 2006.6 mm
Maximum lifting above ground level 444.5 mm
Blade tilt front angle 44 degrees
Blade tilt rear angle 6.5 degrees

Images

Sizes

1. Dimensional length 8484 mm
2. Between tyres width 2540 mm
3. Height to cab upper part 3099 mm
4. Wheelbase 6096 mm
8. Blade base 2591 mm