Construction Machinery. Grader Volvo G740

Steerage

Left and right hinge connection 22 degrees

Sizes

Height to cab upper part 3099 mm
Dimensional length 8636 mm
Between tyres width 2540 mm
Wheelbase 6248 mm
Blade base 2718 mm

Operation

Tyre size 14.00 x 24, G-2
Operating voltage 24 V
Generator current strength 75 amperes
Front axle standard operating weight 4851 kg
Rear axle standard operating weight 11302 kg
Overall standard operating weight 16153 kg
Fuel Capacity 378.5 l.
Cooling system fluid volume 50 l.
Hydraulic system fluid volume 90 l.
Transmission fluid volume 38 l.
Rear differential/final drive fluid volume 23 l.
Each tandem case fluid volume 100 l.

Motor

Manufacturer Cummins
Model M11
Power measured at 2100 rev / min
Torque measured at 1300 rev / min
Effective speeds output 7-8 156.6 kW
Maximum power 156.6 kW
Effective drives torque 7-8 1030.4 Nm
Displacement 10.8 l.
Aspiration turbocharging

Hydraulic system

Type of pump hydraulic system with load sensing
Pump flow rate 183 l/min
Overflow valve pressure 17236.9 kPa

Gear box

Transmission type powershift transmission
Forward gears number 8
Reverse gears number 4
Maximum forward speed 43.8 km/h
Maximum reverse gear 31.4 km/h

Front Axle

Wheel tilt 18 degrees
General fluctuations 16 degrees
Clearance 610 mm

Dump

Mouldboard width 4572 mm
Mouldboard height 736.6 mm
Mouldboard thickness 25.4 mm
Maximum cutting depth 800.1 mm
Left lateral displacement 673.1 mm
Lateral right shift 673.1 mm
Blade pulling at maximum weight 10171.4 kg
Lowered blade pressure 8574.7 kg

Circle

Rotating 360 degrees
Left shift 774.7 mm
Right shift 749.3 mm
Maximum radius outside left tyres 2019.3 mm
Right maximum radius outside tyres 2006.6 mm
Maximum lifting above ground level 436.9 mm
Blade tilt front angle 44 degrees
Diameter 1683 mm
Blade tilt rear angle 2.5 degrees

Images

Sizes

8. Blade base 2718 mm
1. Dimensional length 8636 mm
2. Between tyres width 2540 mm
3. Height to cab upper part 3099 mm
4. Wheelbase 6248 mm