Construction Machinery. Grader Volvo G946

Steerage

Left and right hinge connection	23 degrees
Turn radius	7265 m

Sizes

Height to cab upper part	3225 mm
Dimensional length	9150 mm
Between tyres width	2537 mm
Wheelbase	6280 mm
Blade base	2650 mm
Front part clearance	610 mm

Operation

Tyre size	14:00 x 24, G-2
Operating voltage	24 V
Generator current strength	80 amperes
Front axle standard operating weight	5000 kg
Rear axle standard operating weight	12300 kg
Overall standard operating weight	17300 kg
Front axle maximum operating weight	7570 kg
Rear axle maximum operating weight	14240 kg
Total maximum operating weight	21770 kg
Fuel Capacity	404 l.
Oil system fluid volume	21.5 l.
Cooling system fluid volume	34 l.
Hydraulic system fluid volume	144 l.
Transmission fluid volume	61 l.
Each tandem case fluid volume	100 l.

Motor

Manufacturer	Volvo
Model	D7E
Power measured at	1800 rev / min
Torque measured at	1500 rev / min
Cylinders number	6
Effective speeds output 7-8	167.8 kW
Maximum power	167.8 kW
Effective drives torque 7-8	1023 Nm
Displacement	7.2 l.
Aspiration	Turbocharging with subsequent air cooling (by a cooling radiator)

Hydraulic system

Type of pump	axial piston pump
Pump flow rate	208 l/min
Overflow valve pressure	20684.3 kPa

Gear box

Transmission type	HTE 840, Sequential direct drive gearbox with shifting under load Volvo
Forward gears number	8
Reverse gears number	4
Maximum forward speed	45.4 km/h
Maximum reverse gear	32 km/h

Front Axle

Wheel tilt	18 degrees
General fluctuations	16 degrees
Clearance	610 mm

Dump

Blade pulling at maximum weight	16671 kg
Lowered blade pressure	8650 kg
Mouldboard width	3657.6 mm
Mouldboard height	635 mm
Mouldboard thickness	22 mm
Maximum cutting depth	790 mm
Left lateral displacement	673 mm
Lateral right shift	673 mm

Circle

Diameter	1626 mm
Rotating	360 degrees
Left shift	775 mm
Right shift	749 mm
Maximum radius outside left tyres	2020 mm
Right maximum radius outside tyres	2010 mm
Blade tilt front angle	45 degrees
Blade tilt rear angle	6 degrees

Images

Sizes

1. Dimensional length	9150 mm
2. Between tyres width	2537 mm
3. Height to cab upper part	3225 mm
4. Wheelbase	6280 mm
6. Front part clearance	610 mm
8. Blade base	2650 mm