Construction Machinery. Rough Terrain Truck Case 440CT serie 3

Sizes

Width between caterpillar tracks 1812 mm
Length with bucket 3290 mm
Length without bucket 2600 mm
Height to cab upper part 2050 mm
Clearance 236 mm
Ground clearance at maximum lifting and unloading 2430 mm
Radius at maximum lifting and unloading 620 mm
Machine rear swing radius from center 1450 mm
Turning radius with bucket from center 2020 mm

Operation

Generator current strength 95 amperes
Maximum speed at low range 8.2 km/h
Maximum speed at high range 12.9 km/h
Working weight 4048.3 kg
Fuel Capacity 88.2 l.
Cooling system fluid volume 11.4 l.
Engine oil volume 12 l.
Hydraulic system fluid volume 26.9 l.
Operating voltage 12 V

Motor

Manufacturer Case
Model 445T/M3
Full power 67.1 kW
Effective power 61.9 kW
Power measured at 2300 rev / min
Peak torque 390.5 Nm
Torque measured at 1300 rev / min
Cylinders number 4
Displacement 4.5 l.
Aspiration turbocharging

Load-transfer device

Workload 1360.8 kg
Tipping load 2721.6 kg
Bucket volume 0.47 m3

Hydraulic system

Type of pump gear type pump
Pump flow rate 83 l/min

Carrier

Contact with ground area 1.1 m2
Specific ground pressure 34.5 kPa
Rolling bearings number on either side 3
Caterpillar track length on ground level 1438 mm
Caterpillar track width 400 mm

Images

Sizes

1. Length with bucket 3290 mm
2. Width between caterpillar tracks 1812 mm
3. Height to cab upper part 2050 mm
5. Clearance 236 mm
6. Length without bucket 2600 mm
7. Ground clearance at maximum lifting and unloading 2430 mm
8. Radius at maximum lifting and unloading 620 mm

Carrier

4. Caterpillar track length on ground level 1438 mm