Construction Machinery. Rough Terrain Truck Case 440CT

Sizes

Turning radius with bucket from center	2040 mm
Width between caterpillar tracks	1802 mm
Length with bucket	3230 mm
Length without bucket	2640 mm
Height to cab upper part	1950 mm
Clearance	229 mm
Ground clearance at maximum lifting and unloading	2450 mm
Radius at maximum lifting and unloading	590 mm
Machine rear swing radius from center	1480 mm

Operation

Working weight	4043 kg
Fuel Capacity	83.3 l.
Cooling system fluid volume	17 l.
Engine oil volume	12 l.
Hydraulic system fluid volume	50 l.
Operating voltage	12 V
Generator current strength	95 amperes
Maximum speed at low range	8.2 km/h
Maximum speed at high range	12.2 km/h

Motor

Cylinders number	4
Aspiration	turbocharging
Manufacturer	Case
Model	Family III 445T/M2
Full power	66 kW
Effective power	61 kW
Power measured at	2300 rev / min
Peak torque	357 Nm
Torque measured at	1400 rev / min
Displacement	4.5 l.

Load-transfer device

Workload	1361 kg
Tipping load	2721 kg
Breakout power	2815 kg
Bucket volume	0.47 m3

Hydraulic system

Type of pump	gear type pump
Pump flow rate	83 l/min
Overflow valve pressure	20684.3 kPa

Carrier

Contact with ground area	1.1 m2
Specific ground pressure	34.5 kPa
Rolling bearings number on either side	3
Caterpillar track length on ground level	1436 mm
Caterpillar track width	400 mm
Track width	1400 mm

Images

Sizes

1. Length with bucket	3230 mm
2. Width between caterpillar tracks	1802 mm
3. Height to cab upper part	1950 mm
5. Clearance	229 mm
6. Length without bucket	2640 mm
7. Ground clearance at maximum lifting and unloading	2450 mm
8. Radius at maximum lifting and unloading	590 mm

Carrier

4. Caterpillar track length on ground level	1436 mm
9. Track width	1400 mm