Construction Machinery. Rough Terrain Truck Case 445CT

Sizes

Width between caterpillar tracks	2098 mm
Length with bucket	3440 mm
Length without bucket	2620 mm
Height to cab upper part	2030 mm
Clearance	229 mm
Ground clearance at maximum lifting and unloading	2340 mm
Radius at maximum lifting and unloading	860 mm
Machine rear swing radius from center	1550 mm
Turning radius with bucket from center	2130 mm

Operation

Working weight	4452 kg
Fuel Capacity	65.5 l.
Cooling system fluid volume	17 l.
Engine oil volume	12 l.
Hydraulic system fluid volume	41.5 l.
Operating voltage	12 V
Generator current strength	95 amperes
Maximum speed at low range	8.2 km/h
Maximum speed at high range	12.8 km/h

Motor

Manufacturer	Case
Model	Family III 445/M2
Full power	60 kW
Effective power	55.2 kW
Power measured at	2300 rev / min
Peak torque	320 Nm
Torque measured at	1400 rev / min
Displacement	4.5 l.
Cylinders number	4
Aspiration	natural aspiration

Load-transfer device

Workload	1588 kg
Tipping load	3175 kg
Breakout power	2343.7 kg
Bucket volume	0.54 m3

Hydraulic system

Type of pump	gear type pump
Pump flow rate	80 l/min
Overflow valve pressure	20684.3 kPa

Carrier

Contact with ground area	1.4 m2
Specific ground pressure	27.6 kPa
Rolling bearings number on either side	4
Caterpillar track length on ground level	1645 mm
Caterpillar track width	450 mm
Track width	1661 mm

Images

Sizes

1. Length with bucket	3440 mm
2. Width between caterpillar tracks	2098 mm
3. Height to cab upper part	2030 mm
5. Clearance	229 mm
6. Length without bucket	2620 mm
7. Ground clearance at maximum lifting and unloading	2340 mm
8. Radius at maximum lifting and unloading	860 mm

Carrier

4. Caterpillar track length on ground level	1645 mm
9. Track width	1661 mm