Construction Machinery. Rough Terrain Truck Case 450CT serie 3

Sizes

Width between caterpillar tracks 2112 mm
Length with bucket 3570 mm
Length without bucket 2790 mm
Height to cab upper part 2120 mm
Clearance 287 mm
Ground clearance at maximum lifting and unloading 2410 mm
Radius at maximum lifting and unloading 760 mm
Machine rear swing radius from center 1520 mm
Turning radius with bucket from center 2340 mm

Operation

Working weight 4955.5 kg
Fuel Capacity 78.4 l.
Cooling system fluid volume 11.4 l.
Engine oil volume 12 l.
Hydraulic system fluid volume 64.4 l.
Operating voltage 12 V
Generator current strength 95 amperes
Maximum speed at low range 8.2 km/h
Maximum speed at high range 12.9 km/h

Motor

Manufacturer Case
Model 445T/M3
Full power 67.1 kW
Effective power 61.9 kW
Power measured at 2300 rev / min
Peak torque 390.5 Nm
Torque measured at 1300 rev / min
Displacement 4.5 l.
Cylinders number 4
Aspiration turbocharging

Load-transfer device

Workload 1749.5 kg
Tipping load 3499 kg
Bucket volume 0.55 m3

Hydraulic system

Type of pump gear type pump
Pump flow rate 83 l/min

Carrier

Caterpillar track length on ground level 1638 mm
Caterpillar track width 450 mm
Contact with ground area 1.5 m2
Specific ground pressure 33.1 kPa
Rolling bearings number on either side 4

Images

Sizes

1. Length with bucket 3570 mm
2. Width between caterpillar tracks 2112 mm
3. Height to cab upper part 2120 mm
5. Clearance 287 mm
6. Length without bucket 2790 mm
7. Ground clearance at maximum lifting and unloading 2410 mm
8. Radius at maximum lifting and unloading 760 mm

Carrier

4. Caterpillar track length on ground level 1638 mm