Construction Machinery. Rough Terrain Truck Case 450CT

Sizes

Width between caterpillar tracks	2098 mm
Length with bucket	3590 mm
Length without bucket	2770 mm
Height to cab upper part	2030 mm
Clearance	231 mm
Ground clearance at maximum lifting and unloading	2400 mm
Radius at maximum lifting and unloading	678 mm
Machine rear swing radius from center	1580 mm
Turning radius with bucket from center	2190 mm

Operation

Working weight	4951 kg
Fuel Capacity	78.3 l.
Cooling system fluid volume	17 l.
Engine oil volume	12 l.
Hydraulic system fluid volume	64.3 l.
Operating voltage	12 V
Generator current strength	95 amperes
Maximum speed at low range	8.5 km/h
Maximum speed at high range	12 km/h

Motor

Manufacturer	Case
Model	Family III 445T/M2, 2 level
Full power	65.7 kW
Effective power	61.2 kW
Power measured at	2300 rev / min
Peak torque	356 Nm
Torque measured at	1400 rev / min
Displacement	4.5 l.
Cylinders number	4
Aspiration	turbocharging

Load-transfer device

Workload	1750 kg
Tipping load	3499 kg
Breakout power	2812.3 kg
Bucket volume	0.54 m3

Hydraulic system

Type of pump	gear type pump
Pump flow rate	83.9 l/min
Overflow valve pressure	20684.3 kPa

Carrier

Contact with ground area	1.4 m2
Specific ground pressure	33.1 kPa
Rolling bearings number on either side	4
Caterpillar track length on ground level	1645 mm
Caterpillar track width	450 mm
Track width	1661 mm

Images

Sizes

1. Length with bucket	3590 mm
2. Width between caterpillar tracks	2098 mm
3. Height to cab upper part	2030 mm
5. Clearance	231 mm
6. Length without bucket	2770 mm
7. Ground clearance at maximum lifting and unloading	2400 mm
8. Radius at maximum lifting and unloading	678 mm

Carrier

4. Caterpillar track length on ground level	1645 mm
9. Track width	1661 mm