- Home/
- Specifications/
- Rough Terrain Truck/
- Mustang/
- MTL25
Construction Machinery. Rough Terrain Truck Mustang MTL25
Sizes
| Turning radius with bucket from center | 2692 mm |
| Width between caterpillar tracks | 1844 mm |
| Length with bucket | 4026 mm |
| Length without bucket | 3099 mm |
| Height to cab upper part | 2217 mm |
| Clearance | 363 mm |
| Ground clearance at maximum lifting and unloading | 2375 mm |
| Radius at maximum lifting and unloading | 1041 mm |
| Machine rear swing radius from center | 1816 mm |
Operation
| Working weight | 4850 kg |
| Fuel Capacity | 108 l. |
| Cooling system fluid volume | 15.1 l. |
| Engine oil volume | 14 l. |
| Hydraulic system fluid volume | 95 l. |
| Operating voltage | 12 V |
| Generator current strength | 60 amperes |
| Maximum speed at low range | 8 km/h |
| Maximum speed at high range | 11 km/h |
Motor
| Displacement | 4.4 l. |
| Cylinders number | 4 |
| Aspiration | turbocharging |
| Manufacturer | Yanmar |
| Model | 4TNV106T |
| Full power | 72 kW |
| Power measured at | 2200 rev / min |
| Peak torque | 395 Nm |
| Torque measured at | 1400 rev / min |
Load-transfer device
| Workload | 1600 kg |
| Tipping load | 3201 kg |
| Breakout power | 3942.6 kg |
| Bucket volume | 0.62 m3 |
Hydraulic system
| Pump flow rate | 89 l/min |
| Overflow valve pressure | 20600 kPa |
Carrier
| Contact with ground area | 0.73 m2 |
| Specific ground pressure | 29.6 kPa |
| Rolling bearings number on either side | 5 |
| Caterpillar track length on ground level | 1598 mm |
| Caterpillar track width | 457 mm |
| Track width | 1387 mm |
Images
Sizes
| 8. Radius at maximum lifting and unloading | 1041 mm |
| 1. Length with bucket | 4026 mm |
| 2. Width between caterpillar tracks | 1844 mm |
| 3. Height to cab upper part | 2217 mm |
| 5. Clearance | 363 mm |
| 6. Length without bucket | 3099 mm |
| 7. Ground clearance at maximum lifting and unloading | 2375 mm |
Carrier
| 4. Caterpillar track length on ground level | 1598 mm |
| 9. Track width | 1387 mm |