- Home/
- Specifications/
- Mining Excavator/
- Terex/
- RH40FLC
Construction Machinery. Mining Excavator Terex RH40FLC
Sizes
Width between caterpillar tracks | 4800 mm |
Height to cab upper part | 5720 mm |
Caterpillar track length | 6460 mm |
Caterpillar track length on ground level | 5180 mm |
Clearance | 900 mm |
Upper structure clearance | 1740 mm |
Caterpillar track height | 1580 mm |
Shovel boom/sections 2
Backhoe shovel boom / section | Boom 25'7" (7800mm)/Section 10'10" (3300mm) |
Maximum excavation depth | 7300 mm |
Maximum cut height | 12800 mm |
Maximum unloading height | 8800 mm |
Maximum radius on ground level | 13200 mm |
Shovel boom/sections 1
Backhoe shovel boom / section | Boom 23'11" (7300mm)/Section 9'2" (2800mm) |
Maximum excavation depth | 6000 mm |
Maximum cut height | 12500 mm |
Maximum unloading height | 8900 mm |
Maximum radius on ground level | 12100 mm |
Shovel
Bucket initial volume | 6 m3 |
Bucket minimum volume | 6 m3 |
Maximum bucket volume | 7 m3 |
Operation
Fuel Capacity | 1650 l. |
Hydraulic system fluid volume | 1900 l. |
Rotation speed | 5.6 rev / min |
Operating voltage | 24 V |
Generator current strength | 175 amperes |
Motor
Manufacturer | Caterpillar |
Model | C 18 |
Full power | 522 kW |
Effective power | 495.9 kW |
Power measured at | 1800 rev / min |
Displacement | 18.1 l. |
Aspiration | turbocharging |
Carrier
Excavator specific ground pressure with support 2 | 133.8 kPa |
Excavator specific ground pressure with support 3 | 113.1 kPa |
Rear platform swing radius | 4270 mm |
Maximum travel speed | 2.3 km/h |
Upper rollers number | 3 |
Lower rollers number | 9 |
Track shoes number on either side | 52 |
Track width | 4200 mm |
Backhoe shovel support width 1 | 600 mm |
Backhoe shovel support width 2 | 750 mm |
Backhoe shovel support width 3 | 900 mm |
Unloaded backhoe shovel operational weight with support 1 | 114100 kg |
Unloaded backhoe shovel operational weight with support 2 | 115550 kg |
Unloaded backhoe shovel operational weight with support 3 | 117200 kg |
Excavator specific ground pressure with support 1 | 166.2 kPa |
Images
Sizes
2. Width between caterpillar tracks | 4800 mm |
4. Caterpillar track length on ground level | 5180 mm |
5. Clearance | 900 mm |
7. Height to cab upper part | 5720 mm |
Carrier
6. Track width | 4200 mm |