Construction Machinery. Wheel-Mounted Loader Case 821C

Sizes

Between tyres width 2700 mm
Height to cab upper part 3330 mm
Clearance 401 mm
Wheelbase 3200 mm
Hinge axis maximum height 3950 mm
Radius at maximum lifting and unloading 1110 mm
Length with bucket on ground level 7470 mm

Shovel

Breakout power 36391 pound
Unloading ground clearance at maximum lifting 2970 mm
Shovel width 2770 mm
Bucket capacity with top 2.7 m3
Brimmed bucket capacity 2.3 m3

Operation

Engine oil volume 21 l.
Cooling system fluid volume 32 l.
Transmission fluid volume 12 l.
Front axle / differential fluid volume 33 l.
Rear axle / differential fluid volume 26.5 l.
Static tipping weight 13645 kg
Turn radius 5750 mm
Operating voltage 24 V
Generator current strength 65 amperes
Rear axle oscillating 24 degrees
Tyre size 23.5-25 L3
Working weight 17191.6 kg
Fuel Capacity 268 l.
Hydraulic system fluid volume 174 l.

Motor

Manufacturer Case
Model 6TAA-8304
Effective power 138.7 kW
Full power 152.1 kW
Power measured at 2000 rev / min
Displacement 8.3 l.
Torque measured at 1400 rev / min
Cylinders number 6
Maximum torque 909.8 Nm
Torque increase 51 %
Aspiration Turbocharger with air cooling by oncoming air flow

Hydraulic system

Type of pump pumps with twin vanes
Overflow valve pressure 19400 kPa
Pump bandwidth 189 l/min
Lifting time 5.9 sec
Unloading time 1.6 sec
Lowering time 4.3 sec

Gear box

Transmission type 4F / 3R (4 forward / 3 reverse speeds) proportional with electronic control module, with torque measurement, automatic / manual shifting and modulating
Forward gears number 4
Reverse gears number 3
Maximum forward speed 37.8 km/h
Maximum reverse gear 26.7 km/h

Images

Sizes

1. Length with bucket on ground level 7470 mm
2. Between tyres width 2700 mm
3. Height to cab upper part 3330 mm
4. Wheelbase 3200 mm
5. Clearance 401 mm
6. Hinge axis maximum height 3950 mm
8. Radius at maximum lifting and unloading 1110 mm

Shovel

7. Unloading ground clearance at maximum lifting 2970 mm