- Home/
- Specifications/
- Wheel-Mounted Loader/
- Liebherr/
- L542 2 plus 1
Construction Machinery. Wheel-Mounted Loader Liebherr L542 2 plus 1
Sizes
| Length with bucket on ground level | 7225 mm |
| Height to cab upper part | 3250 mm |
| Clearance | 490 mm |
| Wheelbase | 2975 mm |
| Hinge axis maximum height | 3930 mm |
Shovel
| Breakout power | 105 kN |
| Unloading ground clearance at maximum lifting | 2845 mm |
| Shovel width | 2500 mm |
| Bucket capacity with top | 2.7 m3 |
Operation
| Rear axle / differential fluid volume | 15 l. |
| Static tipping weight | 11040 kg |
| Operating voltage | 24 V |
| Generator current strength | 80 amperes |
| Rear axle oscillating | 12 degrees |
| Tyre size | 20.5R25 |
| Working weight | 13040.8 kg |
| Fuel Capacity | 170 l. |
| Hydraulic system fluid volume | 180 l. |
| Engine oil volume | 29 l. |
| Front axle / differential fluid volume | 16.3 l. |
Motor
| Manufacturer | Liebherr |
| Model | D 934 S AG |
| Full power | 105 kW |
| Power measured at | 2000 rev / min |
| Displacement | 6.4 l. |
| Torque measured at | 1300 rev / min |
| Cylinders number | 4 |
| Maximum torque | 770 Nm |
| Aspiration | turbocharging |
Hydraulic system
| Type of pump | Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit |
| Overflow valve pressure | 33000 kPa |
| Pump bandwidth | 140 l/min |
| Lifting time | 5.9 sec |
| Unloading time | 1.6 sec |
| Lowering time | 4 sec |
Gear box
| Transmission type | hydrostatic |
| Forward gears number | 3 |
| Reverse gears number | 3 |
| Maximum forward speed | 40 km/h |
| Maximum reverse gear | 40 km/h |
Images
Sizes
| 1. Length with bucket on ground level | 7225 mm |
| 3. Height to cab upper part | 3250 mm |
| 4. Wheelbase | 2975 mm |
| 5. Clearance | 490 mm |
| 6. Hinge axis maximum height | 3930 mm |
Shovel
| 7. Unloading ground clearance at maximum lifting | 2845 mm |