Construction Machinery. Wheel-Mounted Loader Liebherr L580 2 plus 2

Sizes

Length with bucket on ground level 9000 mm
Height to cab upper part 3540 mm
Clearance 550 mm
Wheelbase 3570 mm
Hinge axis maximum height 4560 mm
Radius at maximum lifting and unloading 1150 mm

Shovel

Breakout power 175 kN
Unloading ground clearance at maximum lifting 3300 mm
Shovel width 3300 mm
Bucket capacity with top 5 m3

Operation

Working weight 24740 kg
Fuel Capacity 330 l.
Hydraulic system fluid volume 240 l.
Engine oil volume 23.5 l.
Front axle / differential fluid volume 58 l.
Rear axle / differential fluid volume 50 l.
Static tipping weight 20260 kg
Turn radius 7250 mm
Operating voltage 24 V
Generator current strength 55 amperes
Rear axle oscillating 26 degrees
Tyre size 26.5R25

Motor

Manufacturer Liebherr
Model D 926 TI-E A2
Full power 197.6 kW
Power measured at 2000 rev / min
Torque measured at 1200 rev / min
Cylinders number 6
Maximum torque 1285 Nm
Aspiration Turbocharging with intercooler

Hydraulic system

Overflow valve pressure 35000 kPa
Pump bandwidth 290 l/min
Lifting time 5.5 sec
Unloading time 2 sec
Lowering time 3.5 sec
Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit

Gear box

Transmission type hydrostatic 2+2
Forward gears number 3
Reverse gears number 3
Maximum forward speed 40 km/h
Maximum reverse gear 40 km/h

Images

Sizes

1. Length with bucket on ground level 9000 mm
3. Height to cab upper part 3540 mm
4. Wheelbase 3570 mm
5. Clearance 550 mm
6. Hinge axis maximum height 4560 mm
8. Radius at maximum lifting and unloading 1150 mm

Shovel

7. Unloading ground clearance at maximum lifting 3300 mm