- Home/
- Specifications/
- Mining Dump Truck/
- Caterpillar/
- 775D
Mining. Mining Dump Truck Caterpillar 775D
Weight
| Weight without load | 43227.4 kg |
| Laden weight | 106594.2 kg |
| Unloaded front weight distribution | 47.3 % |
| Unloaded rear weight distribution | 52.7 % |
| Loaded front weight distribution | 33.3 % |
| Loaded rear weight distribution | 66.7 % |
Sizes
| Dimensional length | 9700 mm |
| Overall width | 3970 mm |
| Headroom | 4410 mm |
| Wheelbase | 4190 mm |
| Clearance | 600 mm |
| Unloading height | 8800 mm |
| Unloading ground clearance | 660 mm |
Operation
| Operating voltage | 24 V |
| Generator current strength | 50 amperes |
| Tyre size | 24.00-R35 |
| Fuel Capacity | 700 l. |
| Cooling system fluid volume | 151 l. |
| Engine oil volume | 68 l. |
| Differential/final drive fluid volume | 155 l. |
| Steering system fluid volume | 60 l. |
| Brake / lift system fluid volume | 307 l. |
Motor
| Manufacturer | Caterpillar |
| Model | 3412ETA |
| Full power | 540.6 kW |
| Effective power | 516.8 kW |
| Power measured at | 2000 rev / min |
| Displacement | 27 l. |
| Torque measured at | 1200 rev / min |
| Maximum torque | 2757.7 Nm |
| Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) |
| Cylinders number | 12 |
Gear box
| Transmission type | powershift |
| Forward gears number | 7 |
| Reverse gears number | 1 |
| Maximum speed | 65.8 km/h |
Dump
| Nominal payload | 63366.9 kg |
| Brimmed lifting capacity | 31.4 m3 |
| Lifting capacity with top | 41.5 m3 |
| Discharge angle | 60 degrees |
| Lifting time | 9.5 sec |
| Lowering time | 12.5 sec |
Images
Sizes
| 1. Dimensional length | 9700 mm |
| 2. Overall width | 3970 mm |
| 3. Headroom | 4410 mm |
| 4. Wheelbase | 4190 mm |
| 5. Clearance | 600 mm |
| 6. Unloading height | 8800 mm |
| 7. Unloading ground clearance | 660 mm |
Dump
| 8. Discharge angle | 60 degrees |