- Home/
- Specifications/
- Mining Excavator/
- Hitachi/
- EX5500
Mining. Mining Excavator Hitachi EX5500
Sizes
Rear platform swing radius | 7750 mm |
Width between caterpillar tracks | 7400 mm |
Height to cab upper part | 8500 mm |
Caterpillar track length | 9350 mm |
Caterpillar track length on ground level | 7000 mm |
Clearance | 1100 mm |
Upper structure clearance | 3000 mm |
Caterpillar track height | 2730 mm |
Shovel boom/sections 1
Maximum cut height | 20600 mm |
Maximum unloading height | 13000 mm |
Maximum radius on ground level | 20100 mm |
Handle pressure force | 1240 Nm |
Backhoe shovel boom / section | length of shovel boom 10600mm with lever - elongation 5300mm |
Maximum excavation depth | 9000 mm |
Maximum vertical wall digging depth | 5500 mm |
Shovel
Bucket initial volume | 27 m3 |
Bucket minimum volume | 27 m3 |
Maximum bucket volume | 30.6 m3 |
Operation
Fuel Capacity | 10400 l. |
Cooling system fluid volume | 760 l. |
Engine oil volume | 520 l. |
Hydraulic system fluid volume | 6200 l. |
Rotation speed | 3.3 rev / min |
Operating voltage | 24 V |
Generator current strength | 150 amperes |
Motor
Manufacturer | Cummins |
Model | QSK45-C |
Full power | 2013.4 kW |
Effective power | 1941.8 kW |
Power measured at | 1800 rev / min |
Displacement | 90 l. |
Cylinders number | 12 |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) |
Loading bucket
Loading bucket | standard |
Maximum excavation depth | 4550 mm |
Maximum cut height | 18900 mm |
Maximum unloading height | 13100 mm |
Maximum digging radius | 16600 mm |
Handle pressure force | 1570 Nm |
Carrier
Maximum travel speed | 2.3 km/h |
Upper rollers number | 3 |
Lower rollers number | 7 |
Track shoes number on either side | 39 |
Track width | 6000 mm |
Backhoe shovel support width 1 | 1400 mm |
Unloaded backhoe shovel operational weight with support 1 | 518000 kg |
Excavator specific ground pressure with support 1 | 230 kPa |
Bucket loader support width | 1400 mm |
Loading shovel operational weight | 518000 kg |
Bucket loader specific ground pressure | 230 kPa |
Rear platform swing radius | 7750 mm |
Images
Sizes
2. Width between caterpillar tracks | 7400 mm |
4. Caterpillar track length on ground level | 7000 mm |
5. Clearance | 1100 mm |
7. Height to cab upper part | 8500 mm |
8. Rear platform swing radius | 7750 mm |
Loading bucket
17. Maximum cut height | 18900 mm |
18. Maximum unloading height | 13100 mm |
19. Maximum digging radius | 16600 mm |
20. Maximum excavation depth | 4550 mm |
Carrier
6. Track width | 6000 mm |
14. Bucket loader support width | 1400 mm |