vs.

      John Deere 655B vs. John Deere 655C serie II

      12 reasons to buy John Deere 655B:

      Operation

      Fuel Capacity 276.3 l. and 260 l. 6 % more or 16.3 l.
      Each final drive fluid volume 13.2 l. and 8.5 l. 36 % more or 4.7 l.
      Hydraulic system fluid volume 140 l. and 130 l. 7 % more or 10 l.
      Static tipping load 8660 kg and 10470 kg 17 % less or 1810 kg
      Breakout force in folded state 110 kN and 123.1 kN 11 % less or 13.1 kN

      Motor

      Displacement 6.8 l. and 6.7 l. 1 % more or 0.1 l.
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 204 l/min and 155.2 l/min 24 % more or 48.8 l/min
      Lifting time 5.9 sec and 6.5 sec 9 % less or 0.6 sec
      Unloading time 1.3 sec and 1.5 sec 13 % less or 0.2 sec

      14 reasons to buy John Deere 655C serie II:

      Sizes

      Width to outside of caterpillar track 2188 mm and 2151 mm 2 % more or 37 mm
      Clearance 395 mm and 356 mm 10 % more or 39 mm
      Ground clearance at full height and unloading 2827 mm and 2807 mm 1 % more or 20 mm

      Operation

      Engine oil volume 20 l. and 18.9 l. 5 % more or 1.1 l.
      Cooling system fluid volume 68 l. and 26.5 l. 61 % more or 41.5 l.
      Generator current strength 55 amperes and 40 amperes 27 % more or 15 amperes
      Maximum speed 10.9 km/h and 10.5 km/h 4 % more or 0.4 km/h

      Motor

      Effective power 96.9 kW and 89.5 kW 8 % more or 7.4 kW
      Maximum torque 610.1 Nm and 508.4 Nm 17 % more or 101.7 Nm

      Hydraulic system

      Lowering time 2.1 sec and 3.2 sec 34 % less or 1.1 sec

      Carrier

      Specific ground pressure 60 kPa and 82 kPa 27 % less or 22 kPa
      Track shoes number per side 42 and 40 5 % more or 2
      Rolling bearings number on either side 6 and 1 83 % more or 5
      Contact with ground area 2.5 m2 and 1.8 m2 28 % more or 0.7 m2

      Neutral reasons:

      Sizes

      Length to front of caterpillar track 5652 mm and 4339 mm
      Length with bucket on ground level 5652 mm and 6132 mm
      Height to cab upper part 3086 mm and 3129 mm
      Radius at high altitude unloading 1219 mm and 1072 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 14695 kg and 15399.5 kg

      Motor

      Model 6068T and D 924 T-EA1
      Manufacturer John Deere and Liebherr
      Aspiration turbocharging and with water-cooling and turbocharging

      Hydraulic system

      Type of pump gear type pump and Variable displacement piston pump with load sensing proportional pump flow control
      Overflow valve pressure 15514 kPa and 25993.2 kPa

      Carrier

      Track width 1625 mm and 1680 mm
      Track shoe width 381 mm and 508 mm
      Caterpillar track length on ground level 2306 mm and 2478 mm

      Images

      Sizes

      1. Length with bucket on ground level 5652 mm 1. Length with bucket on ground level 6132 mm
      2. Width to outside of caterpillar track 2151 mm 2. Width to outside of caterpillar track 2188 mm
      3. Height to cab upper part 3086 mm 3. Height to cab upper part 3129 mm
      5. Clearance 356 mm 5. Clearance 395 mm
      7. Ground clearance at full height and unloading 2807 mm 7. Ground clearance at full height and unloading 2827 mm
      8. Radius at high altitude unloading 1219 mm 8. Radius at high altitude unloading 1072 mm

      Carrier

      9. Track width 1625 mm 9. Track width 1680 mm