- Home/
- Comparison/
- Wheeled Excavator/
- Hitachi ZX220W-3 vs. John Deere 220DW
Hitachi ZX220W-3 vs. John Deere 220DW
1 reasons to buy Hitachi ZX220W-3:
Swing device
Swing torque | 59370 Nm and 59369.9 Nm | 0 % more or 0.1 Nm |
2 reasons to buy John Deere 220DW:
Operation
Hydraulic pump flow rate | 378 l/min and 378.5 l/min | 0 % less or 0.5 l/min |
Gear box
Maximum travel speed | 37.5 km/h and 27.5 km/h | 27 % more or 10.0 km/h |
Neutral reasons:
Swing device
Rotation speed | 12.2 rev / min and 12.2 rev / min |
Sizes
Overall width | 2470 mm and 2730 mm |
Overall width with lowered supports | 3440 mm and 3440 mm |
Height to cab upper part | 3170 mm and 3170 mm |
Wheelbase | 2750 mm and 2750 mm |
Clearance | 330 mm and 330 mm |
Rear platform swing radius | 2750 mm and 2750 mm |
Upper structure clearance | 1230 mm and 1230 mm |
Operation
Hydraulic system overflow valve pressure | 34301.4 kPa and 34301.4 kPa |
Type of hydraulic pump | 2 piston pumps and Variable Displacement Axial-Piston |
Working weight | 22629 kg and 22629 kg |
Oscillatory axle angle | 7 degrees and 7 degrees |
Fuel Capacity | 355 l. and 355 l. |
Cooling system fluid volume | 26 l. and 26 l. |
Engine oil volume | 23 l. and 23 l. |
Front differential fluid volume | 9.6 l. and 9.6 l. |
Rear differential fluid volume | 13.1 l. and 13.1 l. |
Hydraulic system fluid volume | 340 l. and 340 l. |
Motor
Power measured at | 2000 rev / min and 2000 rev / min |
Manufacturer | Isuzu and Isuzu |
Displacement | 5.2 l. and 5.2 l. |
Model | 4HK1X and 4HK1X, III Level III certified |
Cylinders number | 4 and 4 |
Effective power | 118.6 kW and 118.6 kW |
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with intercooler |
Gear box
Reverse gears number | 2 and 2 |
Forward gears number | 2 and 2 |
Boom/section options 2
Maximum excavation depth | 6080 mm and 6080 mm |
Maximum loading height | 7630 mm and 7630 mm |
Maximum radius along ground level | 9750 mm and 9750 mm |
Maximum vertical wall digging depth | 5250 mm and 5250 mm |
Maximum cut height | 10560 mm and 10560 mm |
Option - Boom/Section (MEX) 2 | two-piece boom and two-piece boom / Section 9'7" (2910mm) |
Unit load-transfer height | 3390 mm and 3390 mm |
Unit load-transfer length | 9320 mm and 9320 mm |
Boom/section options 1
Unit load-transfer height | 3170 mm and 2990 mm |
Unit load-transfer length | 9700 mm and 9700 mm |
Maximum excavation depth | 6290 mm and 6290 mm |
Maximum radius along ground level | 9960 mm and 9960 mm |
Maximum cut height | 10190 mm and 10190 mm |
Option - Boom/Section (MEX) 1 | one-piece boom and one-piece boom 18' 8" (5680mm) / Section 9'7"(2910mm) |
Maximum loading height | 7350 mm and 7350 mm |
Maximum vertical wall digging depth | 5600 mm and 5600 mm |
Images
Sizes
6. Overall width with lowered supports | 3440 mm | 6. Overall width with lowered supports | 3440 mm |
7. Height to cab upper part | 3170 mm | 7. Height to cab upper part | 3170 mm |
8. Rear platform swing radius | 2750 mm | 8. Rear platform swing radius | 2750 mm |
14. Upper structure clearance | 1230 mm | 14. Upper structure clearance | 1230 mm |
2. Overall width | 2470 mm | 2. Overall width | 2730 mm |
4. Wheelbase | 2750 mm | 4. Wheelbase | 2750 mm |
5. Clearance | 330 mm | 5. Clearance | 330 mm |
Boom/section options 1
13. Maximum excavation depth | 6080 mm | 13. Maximum excavation depth | 6080 mm |
1. Unit load-transfer length | 9700 mm | 1. Unit load-transfer length | 9320 mm |
3. Unit load-transfer height | 3170 mm | 3. Unit load-transfer height | 3390 mm |
9. Maximum cut height | 10190 mm | 9. Maximum cut height | 10560 mm |
10. Maximum loading height | 7350 mm | 10. Maximum loading height | 7630 mm |
11. Maximum radius along ground level | 9960 mm | 11. Maximum radius along ground level | 9750 mm |
12. Maximum vertical wall digging depth | 5600 mm | 12. Maximum vertical wall digging depth | 5250 mm |