- Home/
- Comparison/
- Grader/
- Case 845B DHP vs. Volvo G740
Case 845B DHP vs. Volvo G740
7 reasons to buy Case 845B DHP:
Operation
Hydraulic system fluid volume | 179.8 l. and 90 l. | 50 % more or 89.8 l. |
Generator current strength | 90 amperes and 75 amperes | 17 % more or 15 amperes |
Transmission fluid volume | 79.5 l. and 38 l. | 52 % more or 41.5 l. |
Rear differential/final drive fluid volume | 39.7 l. and 23 l. | 42 % more or 16.7 l. |
Motor
Torque measured at | 1500 rev / min and 1300 rev / min | 13 % more or 200 rev |
Power measured at | 2200 rev / min and 2100 rev / min | 5 % more or 100 rev |
Circle
Maximum lifting above ground level | 444.5 mm and 436.9 mm | 2 % more or 7.6 mm |
12 reasons to buy Volvo G740:
Operation
Cooling system fluid volume | 50 l. and 39.7 l. | 21 % more or 10.3 l. |
Each tandem case fluid volume | 100 l. and 60.2 l. | 40 % more or 39.8 l. |
Front axle standard operating weight | 4851 kg and 4496 kg | 7 % more or 355 kg |
Rear axle standard operating weight | 11302 kg and 10109.2 kg | 11 % more or 1192.8 kg |
Fuel Capacity | 378.5 l. and 340.7 l. | 10 % more or 37.8 l. |
Motor
Effective speeds output 7-8 | 156.6 kW and 119.3 kW | 24 % more or 37.3 kW |
Effective drives torque 7-8 | 1030.4 Nm and 759.3 Nm | 26 % more or 271.1 Nm |
Displacement | 10.8 l. and 6.7 l. | 38 % more or 4.1 l. |
Hydraulic system
Pump flow rate | 183 l/min and 185.5 l/min | 1 % less or 2.5 l/min |
Gear box
Maximum forward speed | 43.8 km/h and 42.8 km/h | 2 % more or 1.0 km/h |
Maximum reverse gear | 31.4 km/h and 28.5 km/h | 9 % more or 2.9 km/h |
Dump
Maximum cutting depth | 800.1 mm and 711.2 mm | 11 % more or 88.9 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 22 degrees |
Sizes
Height to cab upper part | 3340 mm and 3099 mm |
Dimensional length | 8534.4 mm and 8636 mm |
Between tyres width | 2499 mm and 2540 mm |
Wheelbase | 6219 mm and 6248 mm |
Blade base | 2562 mm and 2718 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 14.0 x 24-10 PR and 14.00 x 24, G-2 |
Overall standard operating weight | 14605.2 kg and 16153 kg |
Motor
Manufacturer | Case and Cummins |
Model | FPT 6.7L and M11 |
Aspiration | Turbocharged engine with subsequent cooling of charging air by oncoming air flow and turbocharging |
Hydraulic system
Type of pump | piston type with load sensing and hydraulic system with load sensing |
Gear box
Transmission type | Powershift transmission with direct drive and powershift transmission |
Forward gears number | 8 and 8 |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 15.3 degrees and 16 degrees |
Dump
Mouldboard width | 3657.6 mm and 4572 mm |
Mouldboard height | 558.8 mm and 736.6 mm |
Mouldboard thickness | 22 mm and 25.4 mm |
Left lateral displacement | 533.4 mm and 673.1 mm |
Lateral right shift | 685.8 mm and 673.1 mm |
Lowered blade pressure | 7644.8 kg and 8574.7 kg |
Circle
Rotating | 360 degrees and 360 degrees |
Diameter | 1752.6 mm and 1683 mm |
Images
Sizes
1. Dimensional length | 8534.4 mm | 1. Dimensional length | 8636 mm |
2. Between tyres width | 2499 mm | 2. Between tyres width | 2540 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 3099 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 6248 mm |
8. Blade base | 2562 mm | 8. Blade base | 2718 mm |