- Home/
- Comparison/
- Grader/
- Caterpillar 135H vs. Komatsu GD300A-1
Caterpillar 135H vs. Komatsu GD300A-1
13 reasons to buy Caterpillar 135H:
Sizes
Rear ground clearance | 351 mm and 340 mm | 3 % more or 11 mm |
Operation
Front axle standard operating weight | 3738.5 kg and 2250 kg | 40 % more or 1488.5 kg |
Rear axle standard operating weight | 9343.1 kg and 5250 kg | 44 % more or 4093.1 kg |
Motor
Maximum power | 115.6 kW and 55.9 kW | 52 % more or 59.7 kW |
Displacement | 7.2 l. and 4.3 l. | 40 % more or 2.9 l. |
Effective speeds output 5-6 | 115.6 kW and 55.9 kW | 52 % more or 59.7 kW |
Gear box
Maximum forward speed | 42 km/h and 30.4 km/h | 28 % more or 11.6 km/h |
Maximum reverse gear | 33.2 km/h and 31 km/h | 7 % more or 2.2 km/h |
Forward gears number | 8 and 5 | 37 % more or 3 |
Reverse gears number | 6 and 4 | 33 % more or 2 |
Front Axle
Clearance | 608 mm and 425 mm | 30 % more or 183 mm |
Dump
Maximum cutting depth | 775 mm and 270 mm | 65 % more or 505 mm |
Circle
Maximum lifting above ground level | 457 mm and 330 mm | 28 % more or 127 mm |
4 reasons to buy Komatsu GD300A-1:
Steerage
Turn radius | 5.5 m and 7.3 m | 25 % less or 1.8 m |
Sizes
Front part clearance | 425 mm and 351 mm | 17 % more or 74 mm |
Circle
Maximum radius outside left tyres | 1150 mm and 1840 mm | 37 % less or 690 mm |
Right maximum radius outside tyres | 1100 mm and 1912 mm | 42 % less or 812 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 30 degrees |
Sizes
Height to cab upper part | 3332 mm and 3130 mm |
Dimensional length | 10064 mm and 6700 mm |
Between tyres width | 2402 mm and 2045 mm |
Wheelbase | 5923 mm and 4910 mm |
Blade base | 2596 mm and 2165 mm |
Dual axis wheelbase | 1510 mm and 1195 mm |
Operation
Overall standard operating weight | 13081.6 kg and 7500 kg |
Motor
Manufacturer | Caterpillar and Komatsu |
Model | 3126B DITA ATAAC VHP and 4D105-5 |
Gear box
Transmission type | direct drive, powershift and Combined full mesh and synchronizer |
Front Axle
Wheel tilt | 18 degrees and 19 degrees |
General fluctuations | 32 degrees and 26 degrees |
Dump
Mouldboard thickness | 22 mm and 16 mm |
Mouldboard width | 3658 mm and 3100 mm |
Mouldboard height | 610 mm and 580 mm |
Images
Sizes
5. Rear ground clearance | 351 mm | 5. Rear ground clearance | 340 mm |
6. Front part clearance | 351 mm | 6. Front part clearance | 425 mm |
7. Dual axis wheelbase | 1510 mm | 7. Dual axis wheelbase | 1195 mm |
8. Blade base | 2596 mm | 8. Blade base | 2165 mm |
1. Dimensional length | 10064 mm | 1. Dimensional length | 6700 mm |
2. Between tyres width | 2402 mm | 2. Between tyres width | 2045 mm |
3. Height to cab upper part | 3332 mm | 3. Height to cab upper part | 3130 mm |
4. Wheelbase | 5923 mm | 4. Wheelbase | 4910 mm |