- Home/
- Comparison/
- Grader/
- Caterpillar 140H vs. Komatsu GD675-3
Caterpillar 140H vs. Komatsu GD675-3
9 reasons to buy Caterpillar 140H:
Operation
Circular gearbox fluid volume | 7 l. and 5 l. | 29 % more or 2 l. |
Fuel Capacity | 397 l. and 340 l. | 14 % more or 57 l. |
Hydraulic system fluid volume | 80 l. and 45 l. | 44 % more or 35 l. |
Motor
Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Displacement | 10.3 l. and 8.3 l. | 19 % more or 2.0 l. |
Gear box
Reverse gears number | 6 and 4 | 33 % more or 2 |
Maximum forward speed | 44 km/h and 42.2 km/h | 4 % more or 1.8 km/h |
Circle
Right maximum radius outside tyres | 1978 mm and 2000 mm | 1 % less or 22 mm |
Maximum radius outside left tyres | 1896 mm and 2000 mm | 5 % less or 104 mm |
15 reasons to buy Komatsu GD675-3:
Steerage
Turn radius | 6.9 m and 7.5 m | 8 % less or 0.6 m |
Operation
Each tandem case fluid volume | 83 l. and 64 l. | 23 % more or 19 l. |
Front axle standard operating weight | 4300 kg and 4138 kg | 4 % more or 162 kg |
Rear axle standard operating weight | 11510 kg and 10539 kg | 8 % more or 971 kg |
Cooling system fluid volume | 39.5 l. and 38 l. | 4 % more or 1.5 l. |
Motor
Effective speeds output 3-4 | 149 kW and 138 kW | 7 % more or 11 kW |
Maximum power | 149 kW and 138 kW | 7 % more or 11 kW |
Effective speeds output 5-6 | 149 kW and 138 kW | 7 % more or 11 kW |
Effective speeds output 7-8 | 149 kW and 138 kW | 7 % more or 11 kW |
Effective speeds output 1-2 | 134 kW and 123 kW | 8 % more or 11 kW |
Hydraulic system
Pump flow rate | 194 l/min and 206 l/min | 6 % less or 12 l/min |
Gear box
Maximum reverse gear | 38.3 km/h and 34.7 km/h | 9 % more or 3.6 km/h |
Front Axle
Clearance | 630 mm and 600 mm | 5 % more or 30 mm |
Dump
Maximum cutting depth | 815 mm and 715 mm | 12 % more or 100 mm |
Circle
Maximum lifting above ground level | 505 mm and 480 mm | 5 % more or 25 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 20 degrees and 23 degrees |
Sizes
Height to cab upper part | 3131 mm and 3120 mm |
Dimensional length | 8713 mm and 9865 mm |
Between tyres width | 2464 mm and 2550 mm |
Wheelbase | 6169 mm and 6070 mm |
Blade base | 2561 mm and 2600 mm |
Dual axis wheelbase | 1523 mm and 1535 mm |
Operation
Overall standard operating weight | 14677 kg and 15810 kg |
Motor
Cylinders number | 6 and 6 |
Manufacturer | Caterpillar and Komatsu |
Model | 3176C DITA ATAAC VHP and SAA6D114E-3 |
Hydraulic system
Type of pump | axial piston and Hydraulic system of Closed Center Load Sensing System (CLSS) |
Overflow valve pressure | 24150 kPa and 20600 kPa |
Gear box
Transmission type | powershift transmission with direct drive and powershift transmission |
Forward gears number | 8 and 8 |
Front Axle
General fluctuations | 32 degrees and 32 degrees |
Wheel tilt | 18 degrees and 20 degrees |
Dump
Mouldboard width | 3658 mm and 3710 mm |
Mouldboard height | 610 mm and 660 mm |
Mouldboard thickness | 22 mm and 25 mm |
Left lateral displacement | 524 mm and 820 mm |
Lateral right shift | 660 mm and 820 mm |
Circle
Blade tilt front angle | 40 degrees and 40 degrees |
Blade tilt rear angle | 5 degrees and 5 degrees |
Diameter | 1530 mm and 1530 mm |
Left shift | 695 mm and 625 mm |
Right shift | 728 mm and 625 mm |
Images
Sizes
7. Dual axis wheelbase | 1523 mm | 7. Dual axis wheelbase | 1535 mm |
8. Blade base | 2561 mm | 8. Blade base | 2600 mm |
1. Dimensional length | 8713 mm | 1. Dimensional length | 9865 mm |
2. Between tyres width | 2464 mm | 2. Between tyres width | 2550 mm |
3. Height to cab upper part | 3131 mm | 3. Height to cab upper part | 3120 mm |
4. Wheelbase | 6169 mm | 4. Wheelbase | 6070 mm |