vs.

      Champion C60C vs. Komatsu GD555-3

      5 reasons to buy Champion C60C:

      Steerage

      Turn radius 2.9 m and 6.8 m 57 % less or 3.9 m

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev

      Circle

      Right maximum radius outside tyres 1905 mm and 2000 mm 5 % less or 95 mm
      Blade tilt front angle 45 degrees and 40 degrees 11 % more or 5 degrees
      Maximum radius outside left tyres 1905 mm and 2000 mm 5 % less or 95 mm

      6 reasons to buy Komatsu GD555-3:

      Motor

      Effective speeds output 1-2 104 kW and 60 kW 42 % more or 44 kW
      Cylinders number 6 and 4 33 % more or 2
      Displacement 5.9 l. and 3.9 l. 34 % more or 2.0 l.

      Gear box

      Maximum forward speed 42.9 km/h and 32 km/h 25 % more or 10.9 km/h
      Maximum reverse gear 39.1 km/h and 32 km/h 18 % more or 7.1 km/h

      Circle

      Maximum lifting above ground level 485 mm and 305 mm 37 % more or 180 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 27 degrees and 23 degrees

      Sizes

      Height to cab upper part 2896 mm and 3100 mm
      Dimensional length 6350 mm and 9390 mm
      Between tyres width 2184 mm and 2525 mm

      Operation

      Overall standard operating weight 5810 kg and 14040 kg

      Motor

      Manufacturer Cummins and Komatsu
      Model 4BT3.9 and SAA6D102E-2

      Gear box

      Transmission type Hydro-Static Transmission and powershift transmission

      Front Axle

      Wheel tilt 15 degrees and 20 degrees
      General fluctuations 35 degrees and 32 degrees

      Dump

      Mouldboard width 3048 mm and 3710 mm
      Mouldboard height 483 mm and 660 mm
      Mouldboard thickness 16 mm and 22 mm

      Circle

      Blade tilt rear angle 5 degrees and 5 degrees

      Images

      Sizes

      1. Dimensional length 6350 mm 1. Dimensional length 9390 mm
      2. Between tyres width 2184 mm 2. Between tyres width 2525 mm
      3. Height to cab upper part 2896 mm 3. Height to cab upper part 3100 mm