vs.

      John Deere 770A vs. New Holland F106.6

      17 reasons to buy John Deere 770A:

      Steerage

      Turn radius 6.7 m and 7250 m 100 % less or 7243.3 m

      Sizes

      Front part clearance 572 mm and 136 mm 76 % more or 436 mm

      Operation

      Front axle maximum operating weight 4123.6 kg and 3800 kg 8 % more or 323.6 kg
      Front axle standard operating weight 3877.3 kg and 2905 kg 25 % more or 972.3 kg
      Rear axle maximum operating weight 11230 kg and 8200 kg 27 % more or 3030 kg
      Rear axle standard operating weight 9848.4 kg and 7425 kg 25 % more or 2423.4 kg
      Oil system fluid volume 18.9 l. and 12.5 l. 34 % more or 6.4 l.
      Fuel Capacity 265 l. and 189 l. 29 % more or 76 l.

      Motor

      Power measured at 2200 rev / min and 2100 rev / min 5 % more or 100 rev
      Maximum power 111.9 kW and 100.7 kW 10 % more or 11.2 kW
      Displacement 7.6 l. and 5.9 l. 22 % more or 1.7 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 40.4 km/h and 37.8 km/h 6 % more or 2.6 km/h

      Front Axle

      Clearance 572 mm and 485 mm 15 % more or 87 mm

      Circle

      Right maximum radius outside tyres 2250 mm and 2490 mm 10 % less or 240 mm
      Maximum lifting above ground level 432 mm and 400 mm 7 % more or 32 mm

      6 reasons to buy New Holland F106.6:

      Operation

      Hydraulic system fluid volume 170 l. and 117 l. 31 % more or 53 l.
      Each tandem case fluid volume 74 l. and 18.9 l. 74 % more or 55.1 l.
      Generator current strength 70 amperes and 42 amperes 40 % more or 28 amperes

      Hydraulic system

      Pump flow rate 95 l/min and 136.3 l/min 30 % less or 41.3 l/min

      Gear box

      Maximum reverse gear 27.9 km/h and 13.8 km/h 51 % more or 14.1 km/h

      Circle

      Maximum radius outside left tyres 2150 mm and 2280 mm 6 % less or 130 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 28 degrees

      Sizes

      Dimensional length 8470 mm and 8888 mm
      Between tyres width 2440 mm and 2307 mm
      Wheelbase 5970 mm and 5243 mm
      Blade base 2720 mm and 1981 mm
      Dual axis wheelbase 1540 mm and 1250 mm
      Height to cab upper part 3200 mm and 3184 mm

      Operation

      Total maximum operating weight 15353.6 kg and 11500 kg
      Overall standard operating weight 13725.7 kg and 10330 kg
      Tyre size 14.00-25 and 405/70R20
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with intercooler and turbocharging, water cooling
      Model 6-466A and CNH 4-stroke cycle, naturally aspirated diesel engine
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and Axial cam pump, variable displacement piston pump

      Gear box

      Transmission type powershift and powershift transmission

      Front Axle

      Wheel tilt 20 degrees and 22 degrees
      General fluctuations 30 degrees and 15 degrees

      Dump

      Lateral right shift 683 mm and 500 mm
      Mouldboard width 3657.6 mm and 3355 mm
      Mouldboard height 609.6 mm and 152 mm
      Mouldboard thickness 22.4 mm and 19 mm
      Left lateral displacement 683 mm and 700 mm

      Circle

      Rotating 360 degrees and degrees
      Left shift 851 mm and 700 mm
      Right shift 813 mm and 500 mm

      Images

      Sizes

      1. Dimensional length 8470 mm 1. Dimensional length 8888 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2307 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3184 mm
      4. Wheelbase 5970 mm 4. Wheelbase 5243 mm
      6. Front part clearance 572 mm 6. Front part clearance 136 mm
      7. Dual axis wheelbase 1540 mm 7. Dual axis wheelbase 1250 mm
      8. Blade base 2720 mm 8. Blade base 1981 mm