vs.

      John Deere 770A vs. Volvo G726 VHP

      3 reasons to buy John Deere 770A:

      Operation

      Hydraulic system fluid volume 117 l. and 90 l. 23 % more or 27 l.

      Hydraulic system

      Pump flow rate 136.3 l/min and 191 l/min 29 % less or 54.7 l/min

      Circle

      Blade tilt rear angle 10 degrees and 6.5 degrees 35 % more or 3.5 degrees

      16 reasons to buy Volvo G726 VHP:

      Operation

      Cooling system fluid volume 47 l. and 26.5 l. 44 % more or 20.5 l.
      Each tandem case fluid volume 100 l. and 18.9 l. 81 % more or 81.1 l.
      Generator current strength 75 amperes and 42 amperes 44 % more or 33 amperes
      Front axle standard operating weight 4539.1 kg and 3877.3 kg 15 % more or 661.8 kg
      Rear axle standard operating weight 10678.9 kg and 9848.4 kg 8 % more or 830.5 kg
      Fuel Capacity 378.5 l. and 265 l. 30 % more or 113.5 l.

      Motor

      Effective speeds output 7-8 145.4 kW and 111.9 kW 23 % more or 33.5 kW
      Maximum power 145.4 kW and 111.9 kW 23 % more or 33.5 kW
      Effective drives torque 7-8 862.3 Nm and 630.5 Nm 27 % more or 231.8 Nm
      Displacement 8.3 l. and 7.6 l. 8 % more or 0.7 l.

      Gear box

      Maximum forward speed 45.9 km/h and 40.4 km/h 12 % more or 5.5 km/h
      Maximum reverse gear 32.8 km/h and 13.8 km/h 58 % more or 19.0 km/h

      Front Axle

      Clearance 610 mm and 572 mm 6 % more or 38 mm

      Circle

      Maximum radius outside left tyres 2019.3 mm and 2280 mm 11 % less or 260.7 mm
      Right maximum radius outside tyres 2006.6 mm and 2250 mm 11 % less or 243.4 mm
      Maximum lifting above ground level 444.5 mm and 432 mm 3 % more or 12.5 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 25 degrees and 22 degrees

      Sizes

      Blade base 2720 mm and 2591 mm
      Height to cab upper part 3200 mm and 3099 mm
      Dimensional length 8470 mm and 8484 mm
      Between tyres width 2440 mm and 2540 mm
      Wheelbase 5970 mm and 6096 mm

      Operation

      Tyre size 14.00-25 and 14.00 x 24, G-2
      Operating voltage 24 V and 12 V
      Overall standard operating weight 13725.7 kg and 15218 kg

      Motor

      Cylinders number 6 and 6
      Manufacturer John Deere and Cummins
      Model 6-466A and 6C8.3
      Aspiration Turbocharging with intercooler and turbocharging

      Hydraulic system

      Type of pump Constant pressure system with locking in the middle position, with the piston pump of variable displacement volume and hydraulic system with load sensing

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      Wheel tilt 20 degrees and 15 degrees
      General fluctuations 30 degrees and 16 degrees

      Dump

      Mouldboard width 3657.6 mm and 3657.6 mm
      Mouldboard height 609.6 mm and 635 mm
      Mouldboard thickness 22.4 mm and 22.2 mm
      Left lateral displacement 683 mm and 673.1 mm
      Lateral right shift 683 mm and 673.1 mm

      Circle

      Blade tilt front angle 44 degrees and 44 degrees
      Diameter 1500 mm and 1683 mm
      Rotating 360 degrees and 360 degrees
      Left shift 851 mm and 774.7 mm
      Right shift 813 mm and 749.3 mm

      Images

      Sizes

      1. Dimensional length 8470 mm 1. Dimensional length 8484 mm
      2. Between tyres width 2440 mm 2. Between tyres width 2540 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3099 mm
      4. Wheelbase 5970 mm 4. Wheelbase 6096 mm
      8. Blade base 2720 mm 8. Blade base 2591 mm