vs.

      John Deere JD570A vs. Komatsu GD555-3

      3 reasons to buy John Deere JD570A:

      Steerage

      Turn radius 5.5 m and 6.8 m 19 % less or 1.3 m

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 102 l/min and 204.4 l/min 50 % less or 102.4 l/min

      17 reasons to buy Komatsu GD555-3:

      Operation

      Fuel Capacity 340 l. and 189.3 l. 44 % more or 150.7 l.
      Oil system fluid volume 14.4 l. and 11.4 l. 21 % more or 3.0 l.
      Cooling system fluid volume 42 l. and 21.2 l. 50 % more or 20.8 l.
      Hydraulic system fluid volume 85 l. and 79.5 l. 6 % more or 5.5 l.
      Circular gearbox fluid volume 5 l. and 1.4 l. 72 % more or 3.6 l.
      Each tandem case fluid volume 83 l. and 18.9 l. 77 % more or 64.1 l.
      Front axle standard operating weight 4000 kg and 2608 kg 35 % more or 1392 kg
      Rear axle standard operating weight 10040 kg and 6495 kg 35 % more or 3545 kg

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Effective speeds output 7-8 119.3 kW and 63.4 kW 47 % more or 55.9 kW
      Maximum power 119.3 kW and 68.6 kW 42 % more or 50.7 kW
      Effective drives torque 7-8 729.4 Nm and 322.7 Nm 56 % more or 406.7 Nm
      Displacement 5.9 l. and 5.4 l. 8 % more or 0.5 l.

      Gear box

      Maximum reverse gear 39.1 km/h and 11.4 km/h 71 % more or 27.7 km/h
      Maximum forward speed 42.9 km/h and 34.8 km/h 19 % more or 8.1 km/h

      Front Axle

      Clearance 610 mm and 597 mm 2 % more or 13 mm

      Circle

      Maximum lifting above ground level 485 mm and 330 mm 32 % more or 155 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 22 degrees and 23 degrees

      Sizes

      Dual axis wheelbase 1440 mm and 1535 mm
      Height to cab upper part 3200 mm and 3100 mm
      Dimensional length 7430 mm and 9390 mm
      Between tyres width 2410 mm and 2525 mm
      Wheelbase 5280 mm and 5850 mm
      Blade base 2340 mm and 2500 mm

      Operation

      Tyre size 13.00-24 and Low-pressure, without inner tube, 14.00 X 24, 12 layers - G2
      Operating voltage 12 V and 24 V
      Overall standard operating weight 9083 kg and 14040 kg

      Motor

      Manufacturer John Deere and Komatsu
      Cylinders number 6 and 6
      Aspiration turbocharging and turbocharging and cooling at the outlet

      Hydraulic system

      Overflow valve pressure 13789.5 kPa and 20684.3 kPa

      Gear box

      Transmission type powershift and powershift transmission
      Forward gears number 8 and 8
      Reverse gears number 4 and 4

      Front Axle

      General fluctuations 30 degrees and 32 degrees
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Left lateral displacement 794 mm and 820 mm
      Lateral right shift 679 mm and 820 mm
      Mouldboard width 3.7 mm and 3710 mm
      Mouldboard height 559 mm and 660 mm
      Mouldboard thickness 15.8 mm and 22 mm

      Circle

      Diameter 1370 mm and 1529.1 mm
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      1. Dimensional length 7430 mm 1. Dimensional length 9390 mm
      2. Between tyres width 2410 mm 2. Between tyres width 2525 mm
      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 5280 mm 4. Wheelbase 5850 mm
      7. Dual axis wheelbase 1440 mm 7. Dual axis wheelbase 1535 mm
      8. Blade base 2340 mm 8. Blade base 2500 mm