- Home/
- Comparison/
- Grader/
- John Deere JD670 vs. Caterpillar 135H NA
John Deere JD670 vs. Caterpillar 135H NA
4 reasons to buy John Deere JD670:
Steerage
Turn radius | 6.7 m and 7.2 m | 7 % less or 0.5 m |
Operation
Hydraulic system fluid volume | 106 l. and 68 l. | 36 % more or 38 l. |
Motor
Displacement | 6.8 l. and 6.6 l. | 3 % more or 0.2 l. |
Hydraulic system
Pump flow rate | 132 l/min and 148 l/min | 11 % less or 16 l/min |
7 reasons to buy Caterpillar 135H NA:
Operation
Fuel Capacity | 284 l. and 227 l. | 20 % more or 57 l. |
Motor
Effective speeds output 7-8 | 115.6 kW and 93.2 kW | 19 % more or 22.4 kW |
Maximum power | 115.6 kW and 93.2 kW | 19 % more or 22.4 kW |
Gear box
Maximum forward speed | 41.9 km/h and 38.4 km/h | 8 % more or 3.5 km/h |
Maximum reverse gear | 33.1 km/h and 12.3 km/h | 63 % more or 20.8 km/h |
Reverse gears number | 6 and 4 | 33 % more or 2 |
Circle
Maximum lifting above ground level | 457 mm and 409 mm | 11 % more or 48 mm |
Neutral reasons:
Steerage
Left and right hinge connection | 25 degrees and 20 degrees |
Sizes
Height to cab upper part | 3200 mm and 3110 mm |
Dimensional length | 8310 mm and 8260 mm |
Between tyres width | 2340 mm and 2440 mm |
Wheelbase | 5970 mm and 5870 mm |
Blade base | 2540 mm and 2600 mm |
Operation
Overall standard operating weight | 11716 kg and 12950 kg |
Tyre size | 13.00-24 and 13-24 10 PR (G-2) |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | John Deere and Caterpillar |
Hydraulic system
Type of pump | Variable displacement with locking in the middle position and Axial-piston pump |
Overflow valve pressure | 15513.2 kPa and 24131.6 kPa |
Gear box
Forward gears number | 8 and 8 |
Front Axle
Wheel tilt | 20 degrees and 18 degrees |
General fluctuations | 30 degrees and 32 degrees |
Dump
Mouldboard width | 3.7 mm and 3660 mm |
Mouldboard height | 610 mm and 610 mm |
Mouldboard thickness | 22 mm and 22 mm |
Images
Sizes
1. Dimensional length | 8310 mm | 1. Dimensional length | 8260 mm |
2. Between tyres width | 2340 mm | 2. Between tyres width | 2440 mm |
3. Height to cab upper part | 3200 mm | 3. Height to cab upper part | 3110 mm |
4. Wheelbase | 5970 mm | 4. Wheelbase | 5870 mm |
8. Blade base | 2540 mm | 8. Blade base | 2600 mm |