vs.

      Komatsu GD405A-1 vs. Komatsu GD675-3

      5 reasons to buy Komatsu GD405A-1:

      Steerage

      Turn radius 5.6 m and 6.9 m 19 % less or 1.3 m

      Gear box

      Reverse gears number 6 and 4 33 % more or 2
      Maximum reverse gear 45 km/h and 38.3 km/h 15 % more or 6.7 km/h

      Circle

      Right maximum radius outside tyres 1420 mm and 2000 mm 29 % less or 580 mm
      Maximum radius outside left tyres 1370 mm and 2000 mm 31 % less or 630 mm

      11 reasons to buy Komatsu GD675-3:

      Operation

      Front axle standard operating weight 4300 kg and 2550 kg 41 % more or 1750 kg
      Rear axle standard operating weight 11510 kg and 6330 kg 45 % more or 5180 kg

      Motor

      Effective speeds output 5-6 149 kW and 82 kW 45 % more or 67 kW
      Maximum power 149 kW and 82 kW 45 % more or 67 kW
      Effective drives torque 5-6 975 Nm and 382.3 Nm 61 % more or 592.7 Nm
      Displacement 8.3 l. and 6.5 l. 22 % more or 1.8 l.

      Gear box

      Forward gears number 8 and 6 25 % more or 2
      Maximum forward speed 42.2 km/h and 42 km/h 0 % more or 0.2 km/h

      Front Axle

      Clearance 630 mm and 435 mm 31 % more or 195 mm

      Dump

      Maximum cutting depth 815 mm and 440 mm 46 % more or 375 mm

      Circle

      Maximum lifting above ground level 505 mm and 360 mm 29 % more or 145 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 27 degrees and 23 degrees

      Sizes

      Dual axis wheelbase 1305 mm and 1535 mm
      Height to cab upper part 3315 mm and 3120 mm
      Dimensional length 7025 mm and 9865 mm
      Between tyres width 2165 mm and 2550 mm
      Wheelbase 4900 mm and 6070 mm
      Blade base 2100 mm and 2600 mm

      Operation

      Tyre size Front 9.00-20-10PR, Rear 11.00-20-10PR and Low-pressure, without inner tube, 17.5R25
      Overall standard operating weight 8880 kg and 15810 kg

      Motor

      Manufacturer Komatsu and Komatsu
      Model 6D105 and SAA6D114E-3

      Gear box

      Transmission type Hydro-Gear switching and powershift transmission

      Front Axle

      Wheel tilt 22 degrees and 20 degrees
      General fluctuations 26 degrees and 32 degrees

      Dump

      Mouldboard width 3100 mm and 3710 mm
      Mouldboard height 625 mm and 660 mm
      Mouldboard thickness 19 mm and 25 mm

      Images

      Sizes

      1. Dimensional length 7025 mm 1. Dimensional length 9865 mm
      2. Between tyres width 2165 mm 2. Between tyres width 2550 mm
      3. Height to cab upper part 3315 mm 3. Height to cab upper part 3120 mm
      4. Wheelbase 4900 mm 4. Wheelbase 6070 mm
      7. Dual axis wheelbase 1305 mm 7. Dual axis wheelbase 1535 mm
      8. Blade base 2100 mm 8. Blade base 2600 mm