vs.

      Mitsubishi MG130-E vs. Komatsu GD555-3

      3 reasons to buy Mitsubishi MG130-E:

      Motor

      Power measured at 2300 rev / min and 2000 rev / min 13 % more or 300 rev

      Hydraulic system

      Pump flow rate 106 l/min and 204.4 l/min 48 % less or 98.4 l/min

      Gear box

      Reverse gears number 6 and 4 33 % more or 2

      15 reasons to buy Komatsu GD555-3:

      Operation

      Hydraulic system fluid volume 85 l. and 67 l. 21 % more or 18 l.
      Transmission fluid volume 45 l. and 23 l. 49 % more or 22 l.
      Circular gearbox fluid volume 5 l. and 3.5 l. 30 % more or 1.5 l.
      Fuel Capacity 340 l. and 115 l. 66 % more or 225 l.
      Each tandem case fluid volume 83 l. and 26 l. 69 % more or 57 l.
      Oil system fluid volume 14.4 l. and 12 l. 17 % more or 2.4 l.
      Generator current strength 90 amperes and 30 amperes 67 % more or 60 amperes

      Motor

      Cylinders number 6 and 4 33 % more or 2
      Maximum power 119.3 kW and 70.8 kW 41 % more or 48.5 kW
      Displacement 5.9 l. and 4.2 l. 29 % more or 1.7 l.

      Gear box

      Maximum forward speed 42.9 km/h and 32.6 km/h 24 % more or 10.3 km/h
      Maximum reverse gear 39.1 km/h and 33.2 km/h 15 % more or 5.9 km/h
      Forward gears number 8 and 6 25 % more or 2

      Front Axle

      Clearance 610 mm and 480 mm 21 % more or 130 mm

      Circle

      Maximum lifting above ground level 485 mm and 400 mm 18 % more or 85 mm

      Neutral reasons:

      Steerage

      Left and right hinge connection 26 degrees and 23 degrees

      Sizes

      Wheelbase 4900 mm and 5850 mm
      Blade base 2135 mm and 2500 mm
      Height to cab upper part 3010 mm and 3100 mm
      Dimensional length 6910 mm and 9390 mm
      Between tyres width 2140 mm and 2525 mm

      Operation

      Overall standard operating weight 10060 kg and 14040 kg
      Tyre size 10.00-20-12 and Low-pressure, without inner tube, 14.00 X 24, 12 layers - G2
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Mitsubishi and Komatsu
      Model SK4-T and SAA6D102E-2

      Hydraulic system

      Type of pump Pump with double gear and Hydraulic system of Closed Center Load Sensing System (CLSS)
      Overflow valve pressure 17.2 kPa and 20684.3 kPa

      Gear box

      Transmission type planetary gear and powershift transmission

      Front Axle

      General fluctuations 30 degrees and 32 degrees
      Wheel tilt 20 degrees and 20 degrees

      Dump

      Mouldboard width 3100 mm and 3710 mm
      Mouldboard height 610 mm and 660 mm
      Mouldboard thickness 19 mm and 22 mm

      Circle

      Left shift 1470 mm and 625 mm
      Right shift 1230 mm and 625 mm
      Blade tilt front angle 40 degrees and 40 degrees
      Blade tilt rear angle 5 degrees and 5 degrees
      Rotating 360 degrees and 360 degrees

      Images

      Sizes

      8. Blade base 2135 mm 8. Blade base 2500 mm
      1. Dimensional length 6910 mm 1. Dimensional length 9390 mm
      2. Between tyres width 2140 mm 2. Between tyres width 2525 mm
      3. Height to cab upper part 3010 mm 3. Height to cab upper part 3100 mm
      4. Wheelbase 4900 mm 4. Wheelbase 5850 mm