- Home/
- Comparison/
- Grader/
- New Holland F200 vs. Komatsu GD500R-2
New Holland F200 vs. Komatsu GD500R-2
10 reasons to buy New Holland F200:
Steerage
Turn radius | 7.3 m and 10.4 m | 30 % less or 3.1 m |
Sizes
Rear ground clearance | 610 mm and 375 mm | 39 % more or 235 mm |
Motor
Displacement | 8.3 l. and 6.5 l. | 22 % more or 1.8 l. |
Gear box
Forward gears number | 8 and 4 | 50 % more or 4 |
Maximum forward speed | 43 km/h and 41.2 km/h | 4 % more or 1.8 km/h |
Maximum reverse gear | 30.6 km/h and 25.5 km/h | 17 % more or 5.1 km/h |
Front Axle
Clearance | 622 mm and 550 mm | 12 % more or 72 mm |
Dump
Maximum cutting depth | 712 mm and 505 mm | 29 % more or 207 mm |
Circle
Maximum lifting above ground level | 445 mm and 430 mm | 3 % more or 15 mm |
Maximum radius outside left tyres | 1978 mm and 2050 mm | 4 % less or 72 mm |
1 reasons to buy Komatsu GD500R-2:
Circle
Right maximum radius outside tyres | 2000 mm and 2174 mm | 8 % less or 174 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3340 mm and 2975 mm |
Dimensional length | 8555 mm and 7920 mm |
Between tyres width | 2650 mm and 2335 mm |
Wheelbase | 6219 mm and 5780 mm |
Blade base | 2562 mm and 2540 mm |
Dual axis wheelbase | 1602 mm and 1505 mm |
Operation
Tyre size | 14.00 x 24 (10PR) and 13.00-24-8PR (G-2) |
Motor
Manufacturer | Cummins and Komatsu |
Model | 6 CTAA 8.3 2 level and S6D105-1 |
Gear box
Transmission type | Powershift transmission with direct drive and full mesh |
Reverse gears number | 4 and 4 |
Front Axle
Wheel tilt | 18 degrees and 20 degrees |
General fluctuations | 19 degrees and 30 degrees |
Dump
Mouldboard width | 4267 mm and 3710 mm |
Mouldboard height | 671 mm and 655 mm |
Mouldboard thickness | 22 mm and 19 mm |
Images
Sizes
1. Dimensional length | 8555 mm | 1. Dimensional length | 7920 mm |
2. Between tyres width | 2650 mm | 2. Between tyres width | 2335 mm |
3. Height to cab upper part | 3340 mm | 3. Height to cab upper part | 2975 mm |
4. Wheelbase | 6219 mm | 4. Wheelbase | 5780 mm |
5. Rear ground clearance | 610 mm | 5. Rear ground clearance | 375 mm |
7. Dual axis wheelbase | 1602 mm | 7. Dual axis wheelbase | 1505 mm |
8. Blade base | 2562 mm | 8. Blade base | 2540 mm |