vs.

      Hyundai HL780-3A vs. John Deere 824K Z-Bar

      16 reasons to buy Hyundai HL780-3A:

      Sizes

      Clearance 475 mm and 460 mm 3 % more or 15 mm
      Radius at maximum lifting and unloading 1440 mm and 1280 mm 11 % more or 160 mm

      Shovel

      Unloading ground clearance at maximum lifting 3347 mm and 3190 mm 5 % more or 157 mm
      Bucket capacity with top 5.1 m3 and 4.6 m3 10 % more or 0.5 m3
      Brimmed bucket capacity 4.3 m3 and 4 m3 7 % more or 0.3 m3

      Operation

      Transmission fluid volume 43 l. and 27.9 l. 35 % more or 15.1 l.
      Fuel Capacity 470 l. and 469.4 l. 0 % more or 0.6 l.
      Front axle / differential fluid volume 60 l. and 45.9 l. 23 % more or 14.1 l.
      Hydraulic system fluid volume 235 l. and 159 l. 32 % more or 76 l.
      Rear axle / differential fluid volume 60 l. and 45.9 l. 23 % more or 14.1 l.
      Engine oil volume 38 l. and 37.9 l. 0 % more or 0.1 l.
      Static tipping weight 22200 kg and 20508 kg 8 % more or 1692 kg
      Cooling system fluid volume 65 l. and 47.4 l. 27 % more or 17.6 l.

      Motor

      Power measured at 2100 rev / min and 1600 rev / min 24 % more or 500 rev
      Torque measured at 1400 rev / min and 900 rev / min 36 % more or 500 rev
      Maximum torque 1704.3 Nm and 1618.8 Nm 5 % more or 85.5 Nm

      9 reasons to buy John Deere 824K Z-Bar:

      Shovel

      Breakout power 185.4 kN and 243.4 kN 24 % less or 58.0 kN

      Operation

      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Effective power 248.3 kW and 238.6 kW 4 % more or 9.7 kW
      Displacement 13.5 l. and 11 l. 19 % more or 2.5 l.

      Hydraulic system

      Lifting time 5.9 sec and 6.4 sec 8 % less or 0.5 sec
      Lowering time 2.5 sec and 3.5 sec 29 % less or 1.0 sec
      Pump bandwidth 513 l/min and 473 l/min 8 % more or 40 l/min

      Gear box

      Maximum forward speed 40 km/h and 34.7 km/h 13 % more or 5.3 km/h
      Maximum reverse gear 30.1 km/h and 23.3 km/h 23 % more or 6.8 km/h

      Neutral reasons:

      Sizes

      Wheelbase 3700 mm and 3460 mm
      Hinge axis maximum height 4560 mm and 4480 mm
      Length with bucket on ground level 9390 mm and 9260 mm
      Between tyres width 3450 mm and 3065 mm
      Height to cab upper part 3670 mm and 3500 mm

      Shovel

      Shovel width 3450 mm and 3270 mm

      Operation

      Operating voltage 24 V and 24 V
      Rear axle oscillating 26 degrees and 26 degrees
      Tyre size 29.5-25 22PR L3 and 26.5 R 25
      Working weight 29300 kg and 26210 kg

      Motor

      Manufacturer Cummins and John Deere
      Model QSM11 and 6135H, III Level III certified
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow

      Hydraulic system

      Unloading time 1.3 sec and 1.3 sec
      Type of pump open-centered, doubling loop system and two variable displacement piston pumps, axial, with load sensing
      Overflow valve pressure 20615.3 kPa and 25165.8 kPa

      Gear box

      Transmission type fully automatic powershift and Powershift transmission of intermediate type
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      1. Length with bucket on ground level 9390 mm 1. Length with bucket on ground level 9260 mm
      2. Between tyres width 3450 mm 2. Between tyres width 3065 mm
      3. Height to cab upper part 3670 mm 3. Height to cab upper part 3500 mm
      4. Wheelbase 3700 mm 4. Wheelbase 3460 mm
      5. Clearance 475 mm 5. Clearance 460 mm
      6. Hinge axis maximum height 4560 mm 6. Hinge axis maximum height 4480 mm
      8. Radius at maximum lifting and unloading 1440 mm 8. Radius at maximum lifting and unloading 1280 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3347 mm 7. Unloading ground clearance at maximum lifting 3190 mm