vs.

      Liebherr L528 2 plus 1 vs. Komatsu WA500-6

      8 reasons to buy Liebherr L528 2 plus 1:

      Sizes

      Clearance 460 mm and 450 mm 2 % more or 10 mm

      Shovel

      Breakout power 80 kN and 245 kN 67 % less or 165 kN
      Unloading ground clearance at maximum lifting 3530 mm and 3295 mm 7 % more or 235 mm

      Motor

      Power measured at 2400 rev / min and 1900 rev / min 21 % more or 500 rev

      Hydraulic system

      Lifting time 6.6 sec and 7.2 sec 8 % less or 0.6 sec
      Lowering time 4 sec and 4.2 sec 5 % less or 0.2 sec

      Gear box

      Maximum forward speed 40 km/h and 34.9 km/h 13 % more or 5.1 km/h
      Maximum reverse gear 40 km/h and 37.5 km/h 6 % more or 2.5 km/h

      13 reasons to buy Komatsu WA500-6:

      Shovel

      Bucket capacity with top 5.6 m3 and 2.2 m3 61 % more or 3.4 m3

      Operation

      Static tipping weight 23600 kg and 9180 kg 61 % more or 14420 kg
      Fuel Capacity 473 l. and 170 l. 64 % more or 303 l.
      Hydraulic system fluid volume 337 l. and 170 l. 50 % more or 167 l.
      Engine oil volume 45 l. and 12 l. 73 % more or 33 l.
      Front axle / differential fluid volume 87 l. and 16.3 l. 81 % more or 70.7 l.
      Rear axle / differential fluid volume 81 l. and 15 l. 81 % more or 66 l.

      Motor

      Full power 266 kW and 86 kW 68 % more or 180 kW
      Displacement 15.2 l. and 4.5 l. 70 % more or 10.7 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Unloading time 1.7 sec and 1.8 sec 6 % less or 0.1 sec

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1

      Neutral reasons:

      Sizes

      Height to cab upper part 3200 mm and 3785 mm
      Wheelbase 2850 mm and 3780 mm
      Hinge axis maximum height 3775 mm and 4755 mm

      Shovel

      Shovel width 2500 mm and 3400 mm

      Operation

      Working weight 10784.2 kg and 32550 kg

      Motor

      Manufacturer Liebherr and Komatsu
      Model D 504 Tl and SAA6D140E-5
      Aspiration turbocharging and turbocharging

      Hydraulic system

      Overflow valve pressure 31500 kPa and 34300 kPa
      Type of pump Axial piston pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and Double-acting piston type

      Gear box

      Transmission type hydrostatic and Powershift of planetary type

      Images

      Sizes

      3. Height to cab upper part 3200 mm 3. Height to cab upper part 3785 mm
      4. Wheelbase 2850 mm 4. Wheelbase 3780 mm
      5. Clearance 460 mm 5. Clearance 450 mm
      6. Hinge axis maximum height 3775 mm 6. Hinge axis maximum height 4755 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 3530 mm 7. Unloading ground clearance at maximum lifting 3295 mm