- Home/
- Comparison/
- Wheel-Mounted Loader/
- Liebherr L550 2 plus 2 vs. New Holland W60TC
Liebherr L550 2 plus 2 vs. New Holland W60TC
11 reasons to buy Liebherr L550 2 plus 2:
Sizes
Clearance | 530 mm and 330 mm | 38 % more or 200 mm |
Shovel
Unloading ground clearance at maximum lifting | 2882 mm and 2600 mm | 10 % more or 282 mm |
Operation
Fuel Capacity | 300 l. and 100 l. | 67 % more or 200 l. |
Hydraulic system fluid volume | 240 l. and 67 l. | 72 % more or 173 l. |
Generator current strength | 80 amperes and 55 amperes | 31 % more or 25 amperes |
Static tipping weight | 13205 kg and 3500 kg | 73 % more or 9705 kg |
Motor
Displacement | 6.4 l. and 3.1 l. | 52 % more or 3.3 l. |
Hydraulic system
Pump bandwidth | 290 l/min and 67 l/min | 77 % more or 223 l/min |
Gear box
Forward gears number | 3 and 2 | 33 % more or 1 |
Reverse gears number | 3 and 2 | 33 % more or 1 |
Maximum forward speed | 40 km/h and 20 km/h | 50 % more or 20 km/h |
1 reasons to buy New Holland W60TC:
Motor
Power measured at | 2400 rev / min and 2000 rev / min | 17 % more or 400 rev |
Neutral reasons:
Sizes
Length with bucket on ground level | 8220 mm and 5250 mm |
Height to cab upper part | 3365 mm and 2800 mm |
Wheelbase | 3280 mm and 2250 mm |
Hinge axis maximum height | 3915 mm and 3300 mm |
Shovel
Shovel width | 2700 mm and 2050 mm |
Operation
Operating voltage | 24 V and 12 V |
Rear axle oscillating | 26 degrees and 24 degrees |
Tyre size | Michelin 23.5R25 and 365/80 R20 |
Working weight | 16525 kg and 5045 kg |
Motor
Manufacturer | Liebherr and Deutz |
Model | D 934 S A6 and BF4M2011 |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and natural aspiration |
Hydraulic system
Type of pump | Axial cam pump with adjustable flow rate, load sensing with control of the flow rate and output and cut-off pressure in the control unit and gear type pump |
Overflow valve pressure | 33000 kPa and 27000 kPa |
Gear box
Transmission type | hydrostatic and Hydro-Static Transmission |
Images
Sizes
1. Length with bucket on ground level | 8220 mm | 1. Length with bucket on ground level | 5250 mm |
3. Height to cab upper part | 3365 mm | 3. Height to cab upper part | 2800 mm |
4. Wheelbase | 3280 mm | 4. Wheelbase | 2250 mm |
5. Clearance | 530 mm | 5. Clearance | 330 mm |
6. Hinge axis maximum height | 3915 mm | 6. Hinge axis maximum height | 3300 mm |
Shovel
7. Unloading ground clearance at maximum lifting | 2882 mm | 7. Unloading ground clearance at maximum lifting | 2600 mm |