vs.

      Terex TXL400-2 vs. John Deere 644K Z-Bar

      18 reasons to buy Terex TXL400-2:

      Sizes

      Clearance 510 mm and 408 mm 20 % more or 102 mm
      Radius at maximum lifting and unloading 1370 mm and 1120 mm 18 % more or 250 mm

      Shovel

      Bucket capacity with top 3.9 m3 and 3.2 m3 18 % more or 0.7 m3
      Unloading ground clearance at maximum lifting 2975 mm and 2860 mm 4 % more or 115 mm

      Operation

      Fuel Capacity 365 l. and 352 l. 4 % more or 13 l.
      Hydraulic system fluid volume 265 l. and 110 l. 58 % more or 155 l.
      Engine oil volume 25 l. and 24.5 l. 2 % more or 0.5 l.
      Cooling system fluid volume 50 l. and 29.5 l. 41 % more or 20.5 l.
      Transmission fluid volume 54 l. and 23 l. 57 % more or 31 l.
      Front axle / differential fluid volume 45 l. and 22 l. 51 % more or 23 l.
      Rear axle / differential fluid volume 42 l. and 22 l. 48 % more or 20 l.
      Static tipping weight 18900 kg and 15230 kg 19 % more or 3670 kg

      Motor

      Maximum torque 1453.4 Nm and 1016 Nm 30 % more or 437.4 Nm
      Power measured at 2000 rev / min and 1700 rev / min 15 % more or 300 rev
      Displacement 8.9 l. and 6.8 l. 24 % more or 2.1 l.

      Hydraulic system

      Pump bandwidth 380.1 l/min and 310 l/min 18 % more or 70.1 l/min

      Gear box

      Maximum forward speed 38 km/h and 36.6 km/h 4 % more or 1.4 km/h
      Maximum reverse gear 28 km/h and 24.9 km/h 11 % more or 3.1 km/h

      4 reasons to buy John Deere 644K Z-Bar:

      Shovel

      Breakout power 150.8 kN and 220 kN 31 % less or 69.2 kN

      Operation

      Turn radius 5570 mm and 6350 mm 12 % less or 780 mm
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Hydraulic system

      Lifting time 5.5 sec and 6 sec 8 % less or 0.5 sec

      Neutral reasons:

      Sizes

      Length with bucket on ground level 8710 mm and 8140 mm
      Between tyres width 2985 mm and 2875 mm
      Height to cab upper part 3522 mm and 3380 mm
      Wheelbase 3500 mm and 3260 mm
      Hinge axis maximum height 4350 mm and 4070 mm

      Shovel

      Shovel width 3200 mm and 3040 mm

      Operation

      Rear axle oscillating 24 degrees and 26 degrees
      Tyre size 26.5-25-20PR-L3 and 23.5 R25
      Working weight 22500 kg and 18160 kg
      Operating voltage 24 V and 24 V

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow
      Manufacturer Cummins and John Deere
      Model QSL 9 and 6068H, III Level III certified

      Hydraulic system

      Type of pump two variable displacement piston pumps, axial, with load sensing and variable displacement axial piston pump
      Overflow valve pressure 25000.4 kPa and 25165.8 kPa
      Unloading time 1.4 sec and 1.4 sec
      Lowering time 3 sec and 3 sec

      Gear box

      Transmission type powershift transmission and Powershift transmission of intermediate type
      Forward gears number 4 and 4
      Reverse gears number 3 and 3

      Images

      Sizes

      6. Hinge axis maximum height 4350 mm 6. Hinge axis maximum height 4070 mm
      8. Radius at maximum lifting and unloading 1370 mm 8. Radius at maximum lifting and unloading 1120 mm
      1. Length with bucket on ground level 8710 mm 1. Length with bucket on ground level 8140 mm
      2. Between tyres width 2985 mm 2. Between tyres width 2875 mm
      3. Height to cab upper part 3522 mm 3. Height to cab upper part 3380 mm
      4. Wheelbase 3500 mm 4. Wheelbase 3260 mm
      5. Clearance 510 mm 5. Clearance 408 mm

      Shovel

      7. Unloading ground clearance at maximum lifting 2975 mm 7. Unloading ground clearance at maximum lifting 2860 mm