- Home/
- Comparison/
- Felling-and-Bunching Machine/
- John Deere 759J vs. John Deere 853J
John Deere 759J vs. John Deere 853J
4 reasons to buy John Deere 759J:
Operation
Specific ground pressure | 59.3 kPa and 64.1 kPa | 7 % less or 4.8 kPa |
Motor
Effective torque | 1229.7 Nm and 1199.9 Nm | 2 % more or 29.8 Nm |
Carrier
Traction force | 26036.2 kg and 25265.1 kg | 3 % more or 771.1 kg |
Booms
Minimum cutting radius | 3530 mm and 5000 mm | 29 % less or 1470 mm |
10 reasons to buy John Deere 853J:
Sizes
Clearance | 739 mm and 711 mm | 4 % more or 28 mm |
Maximum radius | 8400 mm and 8300 mm | 1 % more or 100 mm |
Operation
Operational weight without attachment | 26675.8 kg and 27242.8 kg | 2 % less or 567.0 kg |
Maximum speed | 4.2 km/h and 3.9 km/h | 7 % more or 0.3 km/h |
Fuel Capacity | 1116.7 l. and 583 l. | 48 % more or 533.7 l. |
Cooling system fluid volume | 41.6 l. and 38.6 l. | 7 % more or 3.0 l. |
Hydraulic system fluid volume | 310.4 l. and 136 l. | 56 % more or 174.4 l. |
Motor
Full power | 219 kW and 179.7 kW | 18 % more or 39.3 kW |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Booms
Maximum cutting radius | 8400 mm and 8300 mm | 1 % more or 100 mm |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 3560 mm and 3370 mm |
Overall width | 3048 mm and 3170 mm |
Rear platform swing radius | 1930 mm and 3000 mm |
Height to cab upper part | 3930 mm and 3780 mm |
Operation
Engine oil volume | 28 l. and 28 l. |
Operating voltage | 24 V and 24 V |
Generator current strength | 80 amperes and 80 amperes |
Motor
Manufacturer | John Deere and John Deere |
Model | 6081H and 6081H |
Cylinders number | 6 and 6 |
Displacement | 8.1 l. and 8.1 l. |
Aspiration | turbocharging and turbocharging |
Carrier
Caterpillar track pitch | 203.2 mm and 203.2 mm |
Shoe dimensions | 609.6 mm and 609.6 mm |
Rolling bearings number on either side | 8 and 8 |
Track width | 2430 mm and 2570 mm |
Booms
Pin lifting at maximum radius | 4720 kg and 6431.9 kg |
Images
Sizes
2. Overall width | 3048 mm | 2. Overall width | 3170 mm |
3. Height to cab upper part | 3930 mm | 3. Height to cab upper part | 3780 mm |
4. Caterpillar track length on ground level | 3560 mm | 4. Caterpillar track length on ground level | 3370 mm |
5. Clearance | 711 mm | 5. Clearance | 739 mm |
8. Rear platform swing radius | 1930 mm | 8. Rear platform swing radius | 3000 mm |
Carrier
6. Track width | 2430 mm | 6. Track width | 2570 mm |
7. Shoe dimensions | 609.6 mm | 7. Shoe dimensions | 609.6 mm |
Booms
9. Minimum cutting radius | 3530 mm | 9. Minimum cutting radius | 5000 mm |
10. Maximum cutting radius | 8300 mm | 10. Maximum cutting radius | 8400 mm |