- Home/
- Comparison/
- Articulated Hauler/
- Case 327B vs. John Deere 250C
Case 327B vs. John Deere 250C
13 reasons to buy Case 327B:
Sizes
Unloading ground clearance | 950 mm and 550 mm | 42 % more or 400 mm |
Operation
Engine oil volume | 30.5 l. and 20.1 l. | 34 % more or 10.4 l. |
Fuel Capacity | 380 l. and 215.8 l. | 43 % more or 164.2 l. |
Transmission fluid volume | 38 l. and 18 l. | 53 % more or 20 l. |
Hydraulic system fluid volume | 220 l. and 79.5 l. | 64 % more or 140.5 l. |
Generator current strength | 140 amperes and 55 amperes | 61 % more or 85 amperes |
Motor
Full power | 235 kW and 184.2 kW | 22 % more or 50.8 kW |
Effective power | 224 kW and 176.7 kW | 21 % more or 47.3 kW |
Displacement | 10.3 l. and 5.9 l. | 43 % more or 4.4 l. |
Maximum torque | 1450 Nm and 802.6 Nm | 45 % more or 647.4 Nm |
Gear box
Reverse gears number | 3 and 1 | 67 % more or 2 |
Dump
Volume with top | 14.5 m3 and 13.8 m3 | 5 % more or 0.7 m3 |
Lifting time | 13 sec and 14 sec | 7 % less or 1 sec |
6 reasons to buy John Deere 250C:
Sizes
Clearance | 491 mm and 470 mm | 4 % more or 21 mm |
Motor
Power measured at | 2500 rev / min and 2100 rev / min | 16 % more or 400 rev |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Gear box
Maximum speed | 48.3 km/h and 46.3 km/h | 4 % more or 2.0 km/h |
Dump
Brimmed volume | 11.5 m3 and 10.6 m3 | 8 % more or 0.9 m3 |
Lowering time | 7 sec and 13 sec | 46 % less or 6 sec |
Neutral reasons:
Weight
Full empty | 22570 kg and 16488.1 kg |
Maximum loading | 45769 kg and 39487.9 kg |
Front axle unloaded | 12000 kg and 8269.9 kg |
Unloaded rear axle | 10570 kg and 4033.8 kg |
Sizes
Dimensional length | 10030 mm and 9168.4 mm |
Overall width | 2960 mm and 2743.2 mm |
Headroom | 3650 mm and 3377.2 mm |
Unloading height | 6230 mm and 5791.2 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | tubeless tires 23.5 R25 and 23.5R25 |
Motor
Aspiration | Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging and cooling at the outlet |
Cylinders number | 6 and 6 |
Manufacturer | Case and Daimler Chrysler |
Model | Family IV 10 l III Level III certified and OM366LA |
Gear box
Transmission type | powershift transmission and Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive |
Forward gears number | 6 and 6 |
Dump
Nominal payload | 23200 kg and 22999.9 kg |
Discharge angle | 68 degrees and 70 degrees |
Images
Sizes
1. Dimensional length | 10030 mm | 1. Dimensional length | 9168.4 mm |
2. Overall width | 2960 mm | 2. Overall width | 2743.2 mm |
3. Headroom | 3650 mm | 3. Headroom | 3377.2 mm |
5. Clearance | 470 mm | 5. Clearance | 491 mm |
6. Unloading height | 6230 mm | 6. Unloading height | 5791.2 mm |
7. Unloading ground clearance | 950 mm | 7. Unloading ground clearance | 550 mm |
Dump
8. Discharge angle | 68 degrees | 8. Discharge angle | 70 degrees |