vs.

      Case 330B vs. John Deere 300C

      12 reasons to buy Case 330B:

      Sizes

      Unloading ground clearance 1000 mm and 640 mm 36 % more or 360 mm

      Operation

      Engine oil volume 30.5 l. and 30.3 l. 1 % more or 0.2 l.
      Transmission fluid volume 38 l. and 15.9 l. 58 % more or 22.1 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Fuel Capacity 380 l. and 268.8 l. 29 % more or 111.2 l.
      Hydraulic system fluid volume 220 l. and 79.5 l. 64 % more or 140.5 l.

      Motor

      Full power 260 kW and 194.6 kW 25 % more or 65.4 kW
      Effective power 249 kW and 187.2 kW 25 % more or 61.8 kW
      Maximum torque 1650 Nm and 980.3 Nm 41 % more or 669.7 Nm

      Dump

      Brimmed volume 13.7 m3 and 13 m3 5 % more or 0.7 m3
      Volume with top 17.6 m3 and 16.8 m3 5 % more or 0.8 m3
      Lifting time 13 sec and 14 sec 7 % less or 1 sec

      6 reasons to buy John Deere 300C:

      Sizes

      Clearance 511 mm and 470 mm 8 % more or 41 mm

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Displacement 15.1 l. and 10.3 l. 32 % more or 4.8 l.
      Torque measured at 1300 rev / min and 1140 rev / min 12 % more or 160 rev

      Gear box

      Maximum speed 46.7 km/h and 46.3 km/h 1 % more or 0.4 km/h

      Dump

      Lowering time 7 sec and 13 sec 46 % less or 6 sec

      Neutral reasons:

      Weight

      Full empty 22570 kg and 19319.9 kg
      Maximum loading 50730 kg and 46319.9 kg
      Front axle unloaded 12000 kg and 9139.9 kg
      Unloaded rear axle 10570 kg and 4990 kg

      Sizes

      Wheelbase 5910 mm and 4119 mm
      Unloading height 6310 mm and 6079 mm
      Dimensional length 10030 mm and 9213 mm
      Overall width 2960 mm and 3283 mm
      Headroom 3650 mm and 3423 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size tubeless tires 23.5 R25 and 23.5R25

      Motor

      Manufacturer Case and Daimler Chrysler
      Model family IV 10 l III Level III certified and OM442
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration

      Gear box

      Forward gears number 6 and 6
      Reverse gears number 3 and 3
      Transmission type powershift transmission and ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive

      Dump

      Nominal payload 28160 kg and 26999.6 kg
      Discharge angle 68 degrees and 65 degrees

      Images

      Sizes

      5. Clearance 470 mm 5. Clearance 511 mm
      6. Unloading height 6310 mm 6. Unloading height 6079 mm
      7. Unloading ground clearance 1000 mm 7. Unloading ground clearance 640 mm
      1. Dimensional length 10030 mm 1. Dimensional length 9213 mm
      2. Overall width 2960 mm 2. Overall width 3283 mm
      3. Headroom 3650 mm 3. Headroom 3423 mm
      4. Wheelbase 5910 mm 4. Wheelbase 4119 mm

      Dump

      8. Discharge angle 68 degrees 8. Discharge angle 65 degrees