vs.

      Case 330B vs. John Deere 300D

      12 reasons to buy Case 330B:

      Sizes

      Clearance 470 mm and 430 mm 9 % more or 40 mm
      Unloading ground clearance 1000 mm and 510 mm 49 % more or 490 mm

      Operation

      Hydraulic system fluid volume 220 l. and 79 l. 64 % more or 141 l.
      Engine oil volume 30.5 l. and 25.5 l. 16 % more or 5.0 l.
      Transmission fluid volume 38 l. and 21.8 l. 43 % more or 16.2 l.
      Fuel Capacity 380 l. and 340 l. 11 % more or 40 l.

      Motor

      Effective power 249 kW and 212.5 kW 15 % more or 36.5 kW
      Displacement 10.3 l. and 9 l. 13 % more or 1.3 l.
      Maximum torque 1650 Nm and 1069.7 Nm 35 % more or 580.3 Nm

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Volume with top 17.6 m3 and 16.6 m3 6 % more or 1.0 m3
      Brimmed volume 13.7 m3 and 12.6 m3 8 % more or 1.1 m3

      6 reasons to buy John Deere 300D:

      Operation

      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev
      Torque measured at 1400 rev / min and 1140 rev / min 19 % more or 260 rev

      Gear box

      Maximum speed 50 km/h and 46.3 km/h 7 % more or 3.7 km/h

      Dump

      Lifting time 11.9 sec and 13 sec 8 % less or 1.1 sec
      Lowering time 6 sec and 13 sec 54 % less or 7 sec

      Neutral reasons:

      Weight

      Full empty 22570 kg and 19500 kg
      Maximum loading 50730 kg and 46800 kg
      Front axle unloaded 12000 kg and 10410 kg
      Unloaded rear axle 10570 kg and 4540 kg

      Sizes

      Dimensional length 10030 mm and 9580 mm
      Overall width 2960 mm and 2950 mm
      Headroom 3650 mm and 3480 mm
      Wheelbase 5910 mm and 5010 mm
      Unloading height 6310 mm and 6200 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size tubeless tires 23.5 R25 and 23.5R25

      Motor

      Manufacturer Case and John Deere
      Model family IV 10 l III Level III certified and 6090
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharger with charge air cooler by oncoming air flow
      Cylinders number 6 and 6

      Gear box

      Transmission type powershift transmission and ZF 6 HP592C automatic
      Forward gears number 6 and 6

      Dump

      Discharge angle 68 degrees and 70 degrees
      Nominal payload 28160 kg and 27300 kg

      Images

      Sizes

      1. Dimensional length 10030 mm 1. Dimensional length 9580 mm
      2. Overall width 2960 mm 2. Overall width 2950 mm
      3. Headroom 3650 mm 3. Headroom 3480 mm
      4. Wheelbase 5910 mm 4. Wheelbase 5010 mm
      5. Clearance 470 mm 5. Clearance 430 mm
      6. Unloading height 6310 mm 6. Unloading height 6200 mm
      7. Unloading ground clearance 1000 mm 7. Unloading ground clearance 510 mm

      Dump

      8. Discharge angle 68 degrees 8. Discharge angle 70 degrees