vs.

      Hitachi AH250D vs. John Deere 300C

      10 reasons to buy Hitachi AH250D:

      Sizes

      Clearance 525 mm and 511 mm 3 % more or 14 mm
      Unloading ground clearance 661 mm and 640 mm 3 % more or 21 mm

      Operation

      Fuel Capacity 340 l. and 268.8 l. 21 % more or 71.2 l.
      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Maximum torque 970 lb / ft and 723 lb / ft 25 % more or 247 lb
      Full power 205 kW and 194.6 kW 5 % more or 10.4 kW
      Effective power 198 kW and 187.2 kW 5 % more or 10.8 kW

      Gear box

      Maximum speed 53 km/h and 46.7 km/h 12 % more or 6.3 km/h

      Dump

      Lifting time 12 sec and 14 sec 14 % less or 2 sec
      Lowering time 6 sec and 7 sec 14 % less or 1 sec

      4 reasons to buy John Deere 300C:

      Motor

      Displacement 15.1 l. and 6.4 l. 58 % more or 8.7 l.

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Brimmed volume 13 m3 and 10.5 m3 19 % more or 2.5 m3
      Volume with top 16.8 m3 and 13.8 m3 18 % more or 3.0 m3

      Neutral reasons:

      Weight

      Front axle unloaded 9350 kg and 9139.9 kg
      Unloaded central axis 4150 kg and 5190 kg
      Unloaded rear axle 4000 kg and 4990 kg
      Loaded front axle 12400 kg and 14589.8 kg
      Loaded central axis 14225 kg and 15965.1 kg
      Loaded rear axle 14075 kg and 15765.1 kg
      Full empty 17500 kg and 19319.9 kg
      Maximum loading 40700 kg and 46319.9 kg

      Sizes

      Dimensional length 9501 mm and 9213 mm
      Overall width 2880 mm and 3283 mm
      Headroom 3425 mm and 3423 mm
      Wheelbase 5012 mm and 4119 mm
      Unloading height 6126 mm and 6079 mm

      Operation

      Tyre size 23.5R25 Radial digger and 23.5R25
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Daimler Chrysler and Daimler Chrysler
      Model MercedesBenz OM906LA and OM442
      Aspiration Turbocharging with intercooler and natural aspiration

      Gear box

      Transmission type ZF 6 HP592C with integrated retarder and ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive
      Forward gears number 6 and 6

      Dump

      Discharge angle 70 degrees and 65 degrees
      Nominal payload 23200 kg and 26999.6 kg

      Images

      Sizes

      1. Dimensional length 9501 mm 1. Dimensional length 9213 mm
      2. Overall width 2880 mm 2. Overall width 3283 mm
      3. Headroom 3425 mm 3. Headroom 3423 mm
      4. Wheelbase 5012 mm 4. Wheelbase 4119 mm
      5. Clearance 525 mm 5. Clearance 511 mm
      6. Unloading height 6126 mm 6. Unloading height 6079 mm
      7. Unloading ground clearance 661 mm 7. Unloading ground clearance 640 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 65 degrees