- Home/
- Comparison/
- Articulated Hauler/
- John Deere 300C vs. John Deere 250C
John Deere 300C vs. John Deere 250C
11 reasons to buy John Deere 300C:
Sizes
Clearance | 511 mm and 491 mm | 4 % more or 20 mm |
Unloading ground clearance | 640 mm and 550 mm | 14 % more or 90 mm |
Operation
Engine oil volume | 30.3 l. and 20.1 l. | 34 % more or 10.2 l. |
Fuel Capacity | 268.8 l. and 215.8 l. | 20 % more or 53.0 l. |
Motor
Full power | 194.6 kW and 184.2 kW | 5 % more or 10.4 kW |
Effective power | 187.2 kW and 176.7 kW | 6 % more or 10.5 kW |
Displacement | 15.1 l. and 5.9 l. | 61 % more or 9.2 l. |
Maximum torque | 980.3 Nm and 802.6 Nm | 18 % more or 177.7 Nm |
Gear box
Reverse gears number | 3 and 1 | 67 % more or 2 |
Dump
Brimmed volume | 13 m3 and 11.5 m3 | 12 % more or 1.5 m3 |
Volume with top | 16.8 m3 and 13.8 m3 | 18 % more or 3.0 m3 |
5 reasons to buy John Deere 250C:
Operation
Cooling system fluid volume | 46.9 l. and 37.9 l. | 19 % more or 9.0 l. |
Transmission fluid volume | 18 l. and 15.9 l. | 12 % more or 2.1 l. |
Motor
Power measured at | 2500 rev / min and 2100 rev / min | 16 % more or 400 rev |
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Gear box
Maximum speed | 48.3 km/h and 46.7 km/h | 3 % more or 1.6 km/h |
Neutral reasons:
Weight
Loaded rear axle | 15765.1 kg and 13214.1 kg |
Full empty | 19319.9 kg and 16488.1 kg |
Maximum loading | 46319.9 kg and 39487.9 kg |
Front axle unloaded | 9139.9 kg and 8269.9 kg |
Unloaded central axis | 5190 kg and 4183.9 kg |
Unloaded rear axle | 4990 kg and 4033.8 kg |
Loaded front axle | 14589.8 kg and 12910.1 kg |
Loaded central axis | 15965.1 kg and 13364.2 kg |
Sizes
Dimensional length | 9213 mm and 9168.4 mm |
Overall width | 3283 mm and 2743.2 mm |
Headroom | 3423 mm and 3377.2 mm |
Unloading height | 6079 mm and 5791.2 mm |
Operation
Hydraulic system fluid volume | 79.5 l. and 79.5 l. |
Operating voltage | 24 V and 24 V |
Generator current strength | 55 amperes and 55 amperes |
Tyre size | 23.5R25 and 23.5R25 |
Motor
Manufacturer | Daimler Chrysler and Daimler Chrysler |
Model | OM442 and OM366LA |
Aspiration | natural aspiration and turbocharging and cooling at the outlet |
Gear box
Transmission type | ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive and Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive |
Forward gears number | 6 and 6 |
Dump
Discharge angle | 65 degrees and 70 degrees |
Nominal payload | 26999.6 kg and 22999.9 kg |
Lifting time | 14 sec and 14 sec |
Lowering time | 7 sec and 7 sec |
Images
Sizes
1. Dimensional length | 9213 mm | 1. Dimensional length | 9168.4 mm |
2. Overall width | 3283 mm | 2. Overall width | 2743.2 mm |
3. Headroom | 3423 mm | 3. Headroom | 3377.2 mm |
5. Clearance | 511 mm | 5. Clearance | 491 mm |
6. Unloading height | 6079 mm | 6. Unloading height | 5791.2 mm |
7. Unloading ground clearance | 640 mm | 7. Unloading ground clearance | 550 mm |
Dump
8. Discharge angle | 65 degrees | 8. Discharge angle | 70 degrees |