vs.

      Link-Belt D30 vs. John Deere 400D

      8 reasons to buy Link-Belt D30:

      Sizes

      Unloading ground clearance 975 mm and 650 mm 33 % more or 325 mm

      Operation

      Hydraulic system fluid volume 200 l. and 178 l. 11 % more or 22 l.
      Cooling system fluid volume 43 l. and 33.6 l. 22 % more or 9.4 l.
      Engine oil volume 34 l. and 30 l. 12 % more or 4 l.

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev
      Torque measured at 1500 rev / min and 1080 rev / min 28 % more or 420 rev

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Lifting time 10 sec and 13 sec 23 % less or 3 sec

      10 reasons to buy John Deere 400D:

      Sizes

      Clearance 560 mm and 484 mm 14 % more or 76 mm

      Operation

      Transmission fluid volume 34 l. and 19 l. 44 % more or 15 l.
      Fuel Capacity 485 l. and 325 l. 33 % more or 160 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Displacement 12 l. and 10.8 l. 10 % more or 1.2 l.
      Maximum torque 1974 Nm and 1233.8 Nm 37 % more or 740.2 Nm

      Gear box

      Maximum speed 52 km/h and 48.3 km/h 7 % more or 3.7 km/h

      Dump

      Brimmed volume 16.9 m3 and 13 m3 23 % more or 3.9 m3
      Volume with top 22.4 m3 and 16.5 m3 26 % more or 5.9 m3
      Lowering time 7.6 sec and 8 sec 5 % less or 0.4 sec

      Neutral reasons:

      Weight

      Full empty 17999.5 kg and 29920 kg
      Maximum loading 45000 kg and 66920 kg
      Front axle unloaded 8999.7 kg and 14930 kg
      Unloaded rear axle 8999.7 kg and 7000 kg

      Sizes

      Dimensional length 9494 mm and 10540 mm
      Overall width 2860 mm and 3810 mm
      Headroom 3460 mm and 3890 mm
      Wheelbase 5583 mm and 5450 mm
      Unloading height 6000 mm and 7240 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5 R25 and 29.5R25

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging / air cooling
      Cylinders number 6 and 6
      Manufacturer Cummins and Mercedes-Benz
      Model M11-C270 and OM501LA

      Gear box

      Transmission type powershift and Allison 4500R ORS fully automatic engine
      Forward gears number 6 and 6

      Dump

      Nominal payload 27215.5 kg and 37000 kg
      Discharge angle 70 degrees and 70 degrees

      Images

      Sizes

      1. Dimensional length 9494 mm 1. Dimensional length 10540 mm
      2. Overall width 2860 mm 2. Overall width 3810 mm
      3. Headroom 3460 mm 3. Headroom 3890 mm
      4. Wheelbase 5583 mm 4. Wheelbase 5450 mm
      5. Clearance 484 mm 5. Clearance 560 mm
      6. Unloading height 6000 mm 6. Unloading height 7240 mm
      7. Unloading ground clearance 975 mm 7. Unloading ground clearance 650 mm

      Dump

      8. Discharge angle 70 degrees 8. Discharge angle 70 degrees