- Home/
- Comparison/
- Articulated Hauler/
- Moxy MT41 vs. John Deere 300C
Moxy MT41 vs. John Deere 300C
13 reasons to buy Moxy MT41:
Sizes
Clearance | 652 mm and 511 mm | 22 % more or 141 mm |
Unloading ground clearance | 800 mm and 640 mm | 20 % more or 160 mm |
Operation
Fuel Capacity | 490 l. and 268.8 l. | 45 % more or 221.2 l. |
Hydraulic system fluid volume | 275 l. and 79.5 l. | 71 % more or 195.5 l. |
Cooling system fluid volume | 50 l. and 37.9 l. | 24 % more or 12.1 l. |
Transmission fluid volume | 55 l. and 15.9 l. | 71 % more or 39.1 l. |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Maximum torque | 1854 Nm and 980.3 Nm | 47 % more or 873.7 Nm |
Full power | 331 kW and 194.6 kW | 41 % more or 136.4 kW |
Gear box
Maximum speed | 53 km/h and 46.7 km/h | 12 % more or 6.3 km/h |
Dump
Brimmed volume | 18.5 m3 and 13 m3 | 30 % more or 5.5 m3 |
Volume with top | 24 m3 and 16.8 m3 | 30 % more or 7.2 m3 |
Lifting time | 12 sec and 14 sec | 14 % less or 2 sec |
5 reasons to buy John Deere 300C:
Operation
Engine oil volume | 30.3 l. and 13.2 l. | 56 % more or 17.1 l. |
Motor
Displacement | 15.1 l. and 11.7 l. | 23 % more or 3.4 l. |
Torque measured at | 1300 rev / min and 1200 rev / min | 8 % more or 100 rev |
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Dump
Lowering time | 7 sec and 11 sec | 36 % less or 4 sec |
Neutral reasons:
Weight
Loaded rear axle | 44350 kg and 15765.1 kg |
Front axle unloaded | 13950 kg and 9139.9 kg |
Full empty | 27150 kg and 19319.9 kg |
Maximum loading | 64350 kg and 46319.9 kg |
Unloaded rear axle | 13200 kg and 4990 kg |
Loaded front axle | 20000 kg and 14589.8 kg |
Sizes
Headroom | 3800 mm and 3423 mm |
Wheelbase | 5360 mm and 4119 mm |
Unloading height | 6545 mm and 6079 mm |
Dimensional length | 10450 mm and 9213 mm |
Overall width | 3475 mm and 3283 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 29.5R25 and 23.5R25 |
Motor
Aspiration | turbocharging and natural aspiration |
Manufacturer | Scania and Daimler Chrysler |
Model | DC 12 and OM442 |
Gear box
Transmission type | ZF 6 WG 310 Dash 4 electronically controlled fully automatic transmission system and ZF 6WG 210 camshaft design with built-in power take-off, gears with full mesh, hydraulic multi-plate clutch, electronic control, hydrodynamic torque converter with a lock, integral PTO drive |
Forward gears number | 6 and 6 |
Reverse gears number | 3 and 3 |
Dump
Nominal payload | 37200 kg and 26999.6 kg |
Discharge angle | 70 degrees and 65 degrees |
Images
Sizes
3. Headroom | 3800 mm | 3. Headroom | 3423 mm |
4. Wheelbase | 5360 mm | 4. Wheelbase | 4119 mm |
5. Clearance | 652 mm | 5. Clearance | 511 mm |
6. Unloading height | 6545 mm | 6. Unloading height | 6079 mm |
7. Unloading ground clearance | 800 mm | 7. Unloading ground clearance | 640 mm |
1. Dimensional length | 10450 mm | 1. Dimensional length | 9213 mm |
2. Overall width | 3475 mm | 2. Overall width | 3283 mm |
Dump
8. Discharge angle | 70 degrees | 8. Discharge angle | 65 degrees |