vs.

      Terex 4066C vs. John Deere 250C

      15 reasons to buy Terex 4066C:

      Sizes

      Clearance 580 mm and 491 mm 15 % more or 89 mm
      Unloading ground clearance 730 mm and 550 mm 25 % more or 180 mm

      Operation

      Fuel Capacity 424 l. and 215.8 l. 49 % more or 208.2 l.
      Hydraulic system fluid volume 170.3 l. and 79.5 l. 53 % more or 90.8 l.
      Cooling system fluid volume 87.1 l. and 46.9 l. 46 % more or 40.2 l.
      Engine oil volume 36 l. and 20.1 l. 44 % more or 15.9 l.
      Transmission fluid volume 41.6 l. and 18 l. 57 % more or 23.6 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Full power 298.3 kW and 184.2 kW 38 % more or 114.1 kW
      Effective power 279.6 kW and 176.7 kW 37 % more or 102.9 kW
      Displacement 12.7 l. and 5.9 l. 54 % more or 6.8 l.
      Maximum torque 1965.9 Nm and 802.6 Nm 59 % more or 1163.3 Nm

      Gear box

      Reverse gears number 3 and 1 67 % more or 2

      Dump

      Brimmed volume 17 m3 and 11.5 m3 32 % more or 5.5 m3
      Volume with top 22 m3 and 13.8 m3 37 % more or 8.2 m3

      5 reasons to buy John Deere 250C:

      Motor

      Power measured at 2500 rev / min and 2100 rev / min 16 % more or 400 rev
      Torque measured at 1600 rev / min and 1200 rev / min 25 % more or 400 rev

      Gear box

      Maximum speed 48.3 km/h and 45.1 km/h 7 % more or 3.2 km/h

      Dump

      Lifting time 14 sec and 16 sec 12 % less or 2 sec
      Lowering time 7 sec and 12 sec 42 % less or 5 sec

      Neutral reasons:

      Weight

      Unloaded rear axle 7652.1 kg and 4033.8 kg
      Loaded front axle 18740.2 kg and 12910.1 kg
      Loaded central axis 23625.4 kg and 13364.2 kg
      Loaded rear axle 23625.4 kg and 13214.1 kg
      Full empty 29490.3 kg and 16488.1 kg
      Maximum loading 65990.9 kg and 39487.9 kg
      Front axle unloaded 14217.9 kg and 8269.9 kg
      Unloaded central axis 7620.4 kg and 4183.9 kg

      Sizes

      Unloading height 6540 mm and 5791.2 mm
      Dimensional length 10650 mm and 9168.4 mm
      Overall width 3430 mm and 2743.2 mm
      Headroom 3660 mm and 3377.2 mm

      Operation

      Tyre size 26.5 R 25 and 23.5R25
      Operating voltage 24 V and 24 V

      Motor

      Cylinders number 6 and 6
      Model lot 60 and OM366LA
      Aspiration Turbocharger with charge air cooler by oncoming air flow, water cooling and turbocharging and cooling at the outlet
      Manufacturer Detroit diesel and Daimler Chrysler

      Gear box

      Transmission type ZF 6WG 65 Automatic gearbox with change to manual mode and Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive
      Forward gears number 6 and 6

      Dump

      Discharge angle 65 degrees and 70 degrees
      Nominal payload 36500.6 kg and 22999.9 kg

      Images

      Sizes

      3. Headroom 3660 mm 3. Headroom 3377.2 mm
      5. Clearance 580 mm 5. Clearance 491 mm
      6. Unloading height 6540 mm 6. Unloading height 5791.2 mm
      7. Unloading ground clearance 730 mm 7. Unloading ground clearance 550 mm
      1. Dimensional length 10650 mm 1. Dimensional length 9168.4 mm
      2. Overall width 3430 mm 2. Overall width 2743.2 mm

      Dump

      8. Discharge angle 65 degrees 8. Discharge angle 70 degrees