- Home/
- Comparison/
- Articulated Hauler/
- Terex TA25 vs. John Deere 250C
Terex TA25 vs. John Deere 250C
13 reasons to buy Terex TA25:
Sizes
Unloading ground clearance | 725 mm and 550 mm | 24 % more or 175 mm |
Operation
Fuel Capacity | 390 l. and 215.8 l. | 45 % more or 174.2 l. |
Hydraulic system fluid volume | 202 l. and 79.5 l. | 61 % more or 122.5 l. |
Cooling system fluid volume | 55 l. and 46.9 l. | 15 % more or 8.1 l. |
Transmission fluid volume | 54 l. and 18 l. | 67 % more or 36 l. |
Generator current strength | 70 amperes and 55 amperes | 21 % more or 15 amperes |
Motor
Effective power | 198.4 kW and 176.7 kW | 11 % more or 21.7 kW |
Displacement | 8.3 l. and 5.9 l. | 29 % more or 2.4 l. |
Maximum torque | 1229.7 Nm and 802.6 Nm | 35 % more or 427.1 Nm |
Full power | 208.8 kW and 184.2 kW | 12 % more or 24.6 kW |
Gear box
Reverse gears number | 3 and 1 | 67 % more or 2 |
Maximum speed | 52 km/h and 48.3 km/h | 7 % more or 3.7 km/h |
Dump
Lifting time | 12 sec and 14 sec | 14 % less or 2 sec |
7 reasons to buy John Deere 250C:
Sizes
Clearance | 491 mm and 405 mm | 18 % more or 86 mm |
Operation
Engine oil volume | 20.1 l. and 20 l. | 0 % more or 0.1 l. |
Motor
Power measured at | 2500 rev / min and 2200 rev / min | 12 % more or 300 rev |
Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Dump
Lowering time | 7 sec and 7.5 sec | 7 % less or 0.5 sec |
Brimmed volume | 11.5 m3 and 10 m3 | 13 % more or 1.5 m3 |
Volume with top | 13.8 m3 and 13.5 m3 | 2 % more or 0.3 m3 |
Neutral reasons:
Weight
Loaded central axis | 14560.3 kg and 13364.2 kg |
Loaded rear axle | 14700.9 kg and 13214.1 kg |
Full empty | 20869.8 kg and 16488.1 kg |
Maximum loading | 43871.5 kg and 39487.9 kg |
Front axle unloaded | 10908.9 kg and 8269.9 kg |
Unloaded central axis | 4939.6 kg and 4183.9 kg |
Unloaded rear axle | 5021.3 kg and 4033.8 kg |
Loaded front axle | 14610.2 kg and 12910.1 kg |
Sizes
Dimensional length | 9800 mm and 9168.4 mm |
Overall width | 3000 mm and 2743.2 mm |
Headroom | 3500 mm and 3377.2 mm |
Unloading height | 6000 mm and 5791.2 mm |
Operation
Operating voltage | 24 V and 24 V |
Tyre size | 23.5R25 and 23.5R25 |
Motor
Aspiration | turbocharging and turbocharging and cooling at the outlet |
Cylinders number | 6 and 6 |
Manufacturer | Cummins and Daimler Chrysler |
Model | QSC 8.3 and OM366LA |
Gear box
Forward gears number | 6 and 6 |
Transmission type | ZF 6WG 210 and Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive |
Dump
Nominal payload | 23001.7 kg and 22999.9 kg |
Discharge angle | 65 degrees and 70 degrees |
Images
Sizes
1. Dimensional length | 9800 mm | 1. Dimensional length | 9168.4 mm |
2. Overall width | 3000 mm | 2. Overall width | 2743.2 mm |
3. Headroom | 3500 mm | 3. Headroom | 3377.2 mm |
5. Clearance | 405 mm | 5. Clearance | 491 mm |
6. Unloading height | 6000 mm | 6. Unloading height | 5791.2 mm |
7. Unloading ground clearance | 725 mm | 7. Unloading ground clearance | 550 mm |
Dump
8. Discharge angle | 65 degrees | 8. Discharge angle | 70 degrees |