- Home/
- Comparison/
- Articulated Hauler/
- Terex TA40 vs. John Deere 350C
Terex TA40 vs. John Deere 350C
17 reasons to buy Terex TA40:
Sizes
Unloading ground clearance | 900 mm and 765 mm | 15 % more or 135 mm |
Clearance | 900 mm and 569 mm | 37 % more or 331 mm |
Operation
Fuel Capacity | 450 l. and 400 l. | 11 % more or 50 l. |
Hydraulic system fluid volume | 330 l. and 140 l. | 58 % more or 190 l. |
Cooling system fluid volume | 67 l. and 34 l. | 49 % more or 33 l. |
Transmission fluid volume | 61 l. and 28 l. | 54 % more or 33 l. |
Generator current strength | 100 amperes and 55 amperes | 45 % more or 45 amperes |
Motor
Full power | 335.6 kW and 257.3 kW | 23 % more or 78.3 kW |
Effective power | 325.9 kW and 249.8 kW | 23 % more or 76.1 kW |
Torque measured at | 1350 rev / min and 1000 rev / min | 26 % more or 350 rev |
Maximum torque | 2098.8 Nm and 1605.3 Nm | 24 % more or 493.5 Nm |
Gear box
Forward gears number | 6 and 5 | 17 % more or 1 |
Maximum speed | 60 km/h and 50 km/h | 17 % more or 10 km/h |
Dump
Lifting time | 12.5 sec and 19 sec | 34 % less or 6.5 sec |
Lowering time | 8 sec and 10 sec | 20 % less or 2 sec |
Brimmed volume | 17.4 m3 and 15 m3 | 14 % more or 2.4 m3 |
Volume with top | 23.3 m3 and 19.6 m3 | 16 % more or 3.7 m3 |
3 reasons to buy John Deere 350C:
Operation
Engine oil volume | 34 l. and 32 l. | 6 % more or 2 l. |
Motor
Power measured at | 2100 rev / min and 2000 rev / min | 5 % more or 100 rev |
Displacement | 14.6 l. and 14 l. | 4 % more or 0.6 l. |
Neutral reasons:
Weight
Front axle unloaded | 15846.7 kg and 13530 kg |
Unloaded central axis | 7484.3 kg and 6830 kg |
Unloaded rear axle | 7424.4 kg and 6530 kg |
Loaded front axle | 18281.6 kg and 19716 kg |
Loaded central axis | 24947.6 kg and 20007 kg |
Loaded rear axle | 24947.6 kg and 19707 kg |
Full empty | 30755.4 kg and 26890 kg |
Maximum loading | 68755.1 kg and 58890 kg |
Sizes
Dimensional length | 10900 mm and 10545 mm |
Overall width | 3400 mm and 3200 mm |
Headroom | 3900 mm and 3631 mm |
Wheelbase | 5300 mm and 4474 mm |
Unloading height | 6900 mm and 6950 mm |
Operation
Tyre size | 29.5R25 and 26.5R25 |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Detroit diesel and Daimler Chrysler |
Model | lot 60 and OM442A |
Aspiration | turbocharging and turbocharging |
Gear box
Transmission type | Allison 4500 ORS fully automatic transmission with a planetary gearshift mechanism and Allison HD4560 installed on the engine automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock |
Reverse gears number | 1 and 1 |
Dump
Discharge angle | 66 degrees and 70 degrees |
Nominal payload | 37999.7 kg and 32000 kg |
Images
Sizes
1. Dimensional length | 10900 mm | 1. Dimensional length | 10545 mm |
2. Overall width | 3400 mm | 2. Overall width | 3200 mm |
3. Headroom | 3900 mm | 3. Headroom | 3631 mm |
4. Wheelbase | 5300 mm | 4. Wheelbase | 4474 mm |
5. Clearance | 900 mm | 5. Clearance | 569 mm |
6. Unloading height | 6900 mm | 6. Unloading height | 6950 mm |
7. Unloading ground clearance | 900 mm | 7. Unloading ground clearance | 765 mm |
Dump
8. Discharge angle | 66 degrees | 8. Discharge angle | 70 degrees |