vs.

      Volvo BM 5350B 4x4 vs. John Deere 250C

      6 reasons to buy Volvo BM 5350B 4x4:

      Sizes

      Unloading ground clearance 705 mm and 550 mm 22 % more or 155 mm

      Operation

      Hydraulic system fluid volume 160 l. and 79.5 l. 50 % more or 80.5 l.
      Fuel Capacity 280 l. and 215.8 l. 23 % more or 64.2 l.

      Motor

      Displacement 6.7 l. and 5.9 l. 12 % more or 0.8 l.

      Gear box

      Maximum speed 50.1 km/h and 48.3 km/h 4 % more or 1.8 km/h

      Dump

      Lifting time 12 sec and 14 sec 14 % less or 2 sec

      11 reasons to buy John Deere 250C:

      Sizes

      Clearance 491 mm and 450 mm 8 % more or 41 mm

      Operation

      Engine oil volume 20.1 l. and 18.5 l. 8 % more or 1.6 l.
      Cooling system fluid volume 46.9 l. and 30 l. 36 % more or 16.9 l.

      Motor

      Full power 184.2 kW and 158.8 kW 14 % more or 25.4 kW
      Effective power 176.7 kW and 141.7 kW 20 % more or 35.0 kW
      Power measured at 2500 rev / min and 2400 rev / min 4 % more or 100 rev
      Maximum torque 802.6 Nm and 633 Nm 21 % more or 169.6 Nm

      Gear box

      Forward gears number 6 and 5 17 % more or 1

      Dump

      Lowering time 7 sec and 22 sec 68 % less or 15 sec
      Brimmed volume 11.5 m3 and 10.1 m3 12 % more or 1.4 m3
      Volume with top 13.8 m3 and 13 m3 6 % more or 0.8 m3

      Neutral reasons:

      Weight

      Loaded rear axle 25500 kg and 13214.1 kg
      Full empty 15300 kg and 16488.1 kg
      Maximum loading 37800 kg and 39487.9 kg
      Front axle unloaded 8850 kg and 8269.9 kg
      Unloaded rear axle 6450 kg and 4033.8 kg
      Loaded front axle 12250 kg and 12910.1 kg

      Sizes

      Dimensional length 8955 mm and 9168.4 mm
      Overall width 3180 mm and 2743.2 mm
      Headroom 3200 mm and 3377.2 mm
      Unloading height 5610 mm and 5791.2 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size Front 23.5 R 25* - Rear 29.5R25** and 23.5R25

      Motor

      Manufacturer Volvo and Daimler Chrysler
      Model TD 70 G and OM366LA
      Torque measured at 1600 rev / min and 1600 rev / min
      Aspiration turbocharging and turbocharging and cooling at the outlet
      Cylinders number 6 and 6

      Gear box

      Transmission type Single stage with freely rotating stator and automatic lock of the conversion factor and Allison MD3560P automatic planetary hydraulic multi-disc clutches, electronic control of the hydraulic system, hydrodynamic torque converter with lock, integral PTO drive
      Reverse gears number 1 and 1

      Dump

      Discharge angle 65 degrees and 70 degrees

      Images

      Sizes

      1. Dimensional length 8955 mm 1. Dimensional length 9168.4 mm
      2. Overall width 3180 mm 2. Overall width 2743.2 mm
      3. Headroom 3200 mm 3. Headroom 3377.2 mm
      5. Clearance 450 mm 5. Clearance 491 mm
      6. Unloading height 5610 mm 6. Unloading height 5791.2 mm
      7. Unloading ground clearance 705 mm 7. Unloading ground clearance 550 mm

      Dump

      8. Discharge angle 65 degrees 8. Discharge angle 70 degrees