vs.

      Volvo A25D vs. John Deere 250D

      12 reasons to buy Volvo A25D:

      Sizes

      Clearance 595 mm and 430 mm 28 % more or 165 mm
      Unloading ground clearance 773 mm and 580 mm 25 % more or 193 mm

      Operation

      Fuel Capacity 400 l. and 340 l. 15 % more or 60 l.
      Hydraulic system fluid volume 175 l. and 79 l. 55 % more or 96 l.
      Cooling system fluid volume 71 l. and 32.9 l. 54 % more or 38.1 l.
      Engine oil volume 38 l. and 25.5 l. 33 % more or 12.5 l.
      Transmission fluid volume 41 l. and 21.8 l. 47 % more or 19.2 l.

      Motor

      Effective power 230.4 kW and 197.6 kW 14 % more or 32.8 kW
      Displacement 9.6 l. and 9 l. 6 % more or 0.6 l.
      Maximum torque 1365 Nm and 1069.7 Nm 22 % more or 295.3 Nm

      Gear box

      Reverse gears number 2 and 1 50 % more or 1
      Maximum speed 53 km/h and 50 km/h 6 % more or 3 km/h

      5 reasons to buy John Deere 250D:

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes

      Motor

      Torque measured at 1400 rev / min and 1350 rev / min 4 % more or 50 rev

      Dump

      Brimmed volume 10.5 m3 and 9.5 m3 10 % more or 1.0 m3
      Volume with top 13.8 m3 and 13 m3 6 % more or 0.8 m3
      Lowering time 6 sec and 9 sec 33 % less or 3 sec

      Neutral reasons:

      Weight

      Unloaded rear axle 7070 kg and 4070 kg
      Loaded front axle 15650 kg and 13160 kg
      Loaded rear axle 27920 kg and 14100 kg
      Front axle unloaded 12400 kg and 10140 kg
      Full empty 19470 kg and 18300 kg
      Maximum loading 43470 kg and 41500 kg

      Sizes

      Headroom 3470 mm and 3480 mm
      Unloading height 5176 mm and 6120 mm
      Wheelbase 4254 mm and 5010 mm
      Dimensional length 9939 mm and 9500 mm
      Overall width 3130 mm and 2820 mm

      Operation

      Operating voltage 24 V and 24 V
      Tyre size 23.5 R 25 and 23.5R25

      Motor

      Aspiration turbocharging and Turbocharger with charge air cooler by oncoming air flow
      Power measured at 2000 rev / min and 2000 rev / min
      Manufacturer Volvo and John Deere
      Model D10BACE2* and 6090

      Gear box

      Forward gears number 6 and 6
      Transmission type Fully automatic and ZF 6 HP592C automatic

      Dump

      Nominal payload 24000 kg and 23200 kg
      Discharge angle 74 degrees and 70 degrees

      Images

      Sizes

      7. Unloading ground clearance 773 mm 7. Unloading ground clearance 580 mm
      1. Dimensional length 9939 mm 1. Dimensional length 9500 mm
      2. Overall width 3130 mm 2. Overall width 2820 mm
      3. Headroom 3470 mm 3. Headroom 3480 mm
      4. Wheelbase 4254 mm 4. Wheelbase 5010 mm
      5. Clearance 595 mm 5. Clearance 430 mm
      6. Unloading height 5176 mm 6. Unloading height 6120 mm

      Dump

      8. Discharge angle 74 degrees 8. Discharge angle 70 degrees