vs.

      John Deere 605C vs. John Deere 655C

      6 reasons to buy John Deere 605C:

      Sizes

      Clearance 408 mm and 395 mm 3 % more or 13 mm

      Operation

      Each final drive fluid volume 8.8 l. and 8.5 l. 3 % more or 0.3 l.
      Static tipping load 6690 kg and 10470 kg 36 % less or 3780 kg
      Breakout force in folded state 100 kN and 12550 kN 99 % less or 12450 kN

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Carrier

      Specific ground pressure 52 kPa and 54 kPa 4 % less or 2 kPa

      15 reasons to buy John Deere 655C:

      Sizes

      Width to outside of caterpillar track 2235 mm and 2057 mm 8 % more or 178 mm
      Ground clearance at full height and unloading 2820 mm and 2679 mm 5 % more or 141 mm

      Operation

      Hydraulic system fluid volume 130 l. and 126 l. 3 % more or 4 l.
      Bucket capacity with top 1.8 m3 and 1.3 m3 28 % more or 0.5 m3
      Generator current strength 55 amperes and 45 amperes 18 % more or 10 amperes
      Maximum speed 10.9 km/h and 8.9 km/h 18 % more or 2.0 km/h
      Fuel Capacity 261 l. and 180 l. 31 % more or 81 l.
      Cooling system fluid volume 68 l. and 24 l. 65 % more or 44 l.
      Engine oil volume 20 l. and 14.7 l. 26 % more or 5.3 l.

      Motor

      Effective power 96.9 kW and 73.8 kW 24 % more or 23.1 kW
      Displacement 6.6 l. and 4.5 l. 32 % more or 2.1 l.
      Maximum torque 585.7 Nm and 416.2 Nm 29 % more or 169.5 Nm

      Hydraulic system

      Pump bandwidth 156 l/min and 115.1 l/min 26 % more or 40.9 l/min

      Carrier

      Track shoes number per side 42 and 38 10 % more or 4
      Contact with ground area 2.8 m2 and 2 m2 29 % more or 0.8 m2

      Neutral reasons:

      Sizes

      Length to front of caterpillar track 3859 mm and 4339 mm
      Length with bucket on ground level 5383 mm and 6132 mm
      Height to cab upper part 2998 mm and 3129 mm
      Radius at high altitude unloading 890 mm and 1072 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 10704.8 kg and 15400 kg

      Motor

      Manufacturer John Deere and Liebherr
      Model 4045TF278 and D924T-Ea1
      Aspiration with water-cooling and turbocharging and turbocharging
      Torque measured at 1400 rev / min and 1400 rev / min
      Cylinders number 4 and 4

      Hydraulic system

      Overflow valve pressure 22994 kPa and 26000 kPa
      Type of pump gear type pump and Variable displacement piston pump with load sensing proportional pump flow control

      Carrier

      Track shoe width 457.2 mm and 560 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track length on ground level 2210 mm and 2478 mm
      Track width 1600 mm and 1680 mm

      Images

      Sizes

      1. Length with bucket on ground level 5383 mm 1. Length with bucket on ground level 6132 mm
      2. Width to outside of caterpillar track 2057 mm 2. Width to outside of caterpillar track 2235 mm
      3. Height to cab upper part 2998 mm 3. Height to cab upper part 3129 mm
      5. Clearance 408 mm 5. Clearance 395 mm
      7. Ground clearance at full height and unloading 2679 mm 7. Ground clearance at full height and unloading 2820 mm
      8. Radius at high altitude unloading 890 mm 8. Radius at high altitude unloading 1072 mm

      Carrier

      9. Track width 1600 mm 9. Track width 1680 mm