- Home/
- Comparison/
- Crawler-Mounted Loader/
- John Deere 655C serie II vs. Caterpillar 983
John Deere 655C serie II vs. Caterpillar 983
5 reasons to buy John Deere 655C serie II:
Operation
Generator current strength | 55 amperes and 19 amperes | 65 % more or 36 amperes |
Static tipping load | 10470 kg and 22080.9 kg | 53 % less or 11610.9 kg |
Breakout force in folded state | 123.1 kN and 195.1 kN | 37 % less or 72.0 kN |
Hydraulic system
Lifting time | 6.5 sec and 7.7 sec | 16 % less or 1.2 sec |
Lowering time | 2.1 sec and 3.2 sec | 34 % less or 1.1 sec |
18 reasons to buy Caterpillar 983:
Sizes
Width to outside of caterpillar track | 2900 mm and 2188 mm | 25 % more or 712 mm |
Clearance | 600 mm and 395 mm | 34 % more or 205 mm |
Ground clearance at full height and unloading | 3650 mm and 2827 mm | 23 % more or 823 mm |
Operation
Maximum speed | 11.9 km/h and 10.9 km/h | 8 % more or 1.0 km/h |
Fuel Capacity | 510 l. and 260 l. | 49 % more or 250 l. |
Cooling system fluid volume | 87 l. and 68 l. | 22 % more or 19 l. |
Engine oil volume | 41 l. and 20 l. | 51 % more or 21 l. |
Each final drive fluid volume | 32 l. and 8.5 l. | 73 % more or 23.5 l. |
Hydraulic system fluid volume | 144 l. and 130 l. | 10 % more or 14 l. |
Bucket capacity with top | 3.7 m3 and 1.8 m3 | 51 % more or 1.9 m3 |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 205.1 kW and 96.9 kW | 53 % more or 108.2 kW |
Displacement | 14.6 l. and 6.7 l. | 54 % more or 7.9 l. |
Power measured at | 2060 rev / min and 2000 rev / min | 3 % more or 60 rev |
Hydraulic system
Pump bandwidth | 520 l/min and 155.2 l/min | 70 % more or 364.8 l/min |
Unloading time | 1.4 sec and 1.5 sec | 7 % less or 0.1 sec |
Carrier
Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
Contact with ground area | 3.8 m2 and 2.5 m2 | 34 % more or 1.3 m2 |
Neutral reasons:
Sizes
Length to front of caterpillar track | 4339 mm and 4620 mm |
Length with bucket on ground level | 6132 mm and 6780 mm |
Radius at high altitude unloading | 1072 mm and 2160 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 15399.5 kg and 32500 kg |
Motor
Aspiration | with water-cooling and turbocharging and turbocharging |
Manufacturer | Liebherr and Caterpillar |
Model | D 924 T-EA1 and D343 |
Hydraulic system
Overflow valve pressure | 25993.2 kPa and 14823.7 kPa |
Carrier
Track shoes number per side | 42 and 42 |
Caterpillar track length on ground level | 2478 mm and 3380 mm |
Track shoe width | 508 mm and 560 mm |
Track width | 1680 mm and 2340 mm |
Images
Sizes
7. Ground clearance at full height and unloading | 2827 mm | 7. Ground clearance at full height and unloading | 3650 mm |
8. Radius at high altitude unloading | 1072 mm | 8. Radius at high altitude unloading | 2160 mm |
1. Length with bucket on ground level | 6132 mm | 1. Length with bucket on ground level | 6780 mm |
2. Width to outside of caterpillar track | 2188 mm | 2. Width to outside of caterpillar track | 2900 mm |
5. Clearance | 395 mm | 5. Clearance | 600 mm |
Carrier
9. Track width | 1680 mm | 9. Track width | 2340 mm |